Used CNC Lathes - Daewoo Haas and Mori Seiki Lathe Machines| KDCapital

Machines in the CNC Lathes Category

Re-Sort Results By: Year | Make | Price

Page 1 of 2

29 Machines Available

1 2 Next Last

View Photos

2005 Mori Seiki MT 2500SZ/1500

5 Axis, 120 Tool, Twin Spindle,

$399,000.00

Ref No: 6000069

View Photos

1999 Mori Seiki SL-75

Fanuc 18, 24" Chuck, 35" Swing, 68" Centers, 6.6" Bore, Conveyor,

$159,900.00

Ref No: 5999936

View Photos

2000 Mori Seiki ZT-2500

LOW LOW HOURS, MSG 501 Control, Dual 12 Position Turrets, Live Tooling On Both Turrets, Y-Axis on Upper Turret, Dual 30 HP Spindles with 10" Chucks, 2.8" Bar Capacity, Parts Catcher, Chip Conveyor

$159,000.00

Ref No: 6019045

View Photos

2000 Mori Seiki ZL-200SMC

Fanuc MSC501 CNC Control, 26.7" Swing, 15.3"/ 11.5" Max Turn Diam, 11.9" Max Run Length, 40 to 4,000 RPM Main & Sub, .001 Deg C-Axis Indexing, 12 / 8 Tools, 2.63" Bar Cap, Live Tool, Chip Conveyor, Parts Catcher w/ Work Piece Conveyor, Removable Tool Pre Setter, 8" Chuck, Main; 6" Sub, LNS QL Servo S2 4-ft Bar Loader, CoolJet UltraFlex 1,000 PSI High Pressure Coolant System, 5 Live Tool Holders Included, 8 Misc ID/OD Holders also Included, Smog Hog Mist Extraction Low Hours, See UNDER POWER!! !!! 650 HOURS !!!

$143,500.00

Ref No: 5999292

View Photos

1998 Mori Seiki DL-150Y

5000 RPM, 12 Station, 7.5/10 HP, MSC 518 Control, LNS Quick Load Barfeeder

$119,000.00

Ref No: 786005

View Photos

1985 Mori Seiki SL-8F

1985, Fanuc OTC Control, 32" Chuck, 51" Turn Diameter, Conveyor

$99,500.00

Ref No: 784990

View Photos

1989 Mori Seiki SL-35MC/750

3500 RPM, 30HP, 12Station Turret, Live Tool, Chip

$99,000.00

Ref No: 5999892

View Photos

1997 Mori Seiki SL-65B

24" chuck, 5.6" Bar Cap. MSC-516 Control, 12 Turret, Chip, Tail

$95,000.00

Ref No: 6037306

View Photos

2004 Mori Seiki NL-1500 MC

6" Chuck, 12 Station Turret, 6,000 RPM, Mitz Control, Chip

$89,900.00

Ref No: 6000106

View Photos

1991 Mori Seiki SL-65A

Fanuc Control, 15" Chuck, 12 Pos. Turret, 35" Swing, 1800RPM, 4.1" Bore, Tailstock, Conveyor

$82,000.00

Ref No: 6000311

View Photos

1999 Mori Seiki SL-200 SMC

5 Axis CNC Mill Turning Center

$79,000.00

Ref No: 6018942

View Photos

2007 Mori Seiki DuraTurn 2050

MSC-504 control, 24" Sw Over Bed, 14.1" Max Turn Diam, 20.8" Turn Length, 21.5" Centers, 2.5" Bar Cap, 20 HP, 4,000 RPM, Detachable Tool Setter, Programmable Tailstock, 8" Kitagawa B208 Chuck, Assortment of Boring Bar Holders, Wedges, Clamps, Included…

$72,900.00

Ref No: 6000041

View Photos

1982 Mori Seiki SL-8A

39" Swing, 60HP 4 Speed Transmission, 8.5" Bore, Fanuc 6TB, Conveyor,

$69,900.00

Ref No: 786896

View Photos

2002 Mori Seiki SL-154

Mori Seiki MSG-805 MAPPS Conversational Programming, 16 C Collet Chuck, 300 PSI Coolant Pump, Tool Presetter, Tool Life Management, Auto Parts Catcher, LNS Eco Auto Load Bar Feed, 6" 3 Jaw Chuck

$69,500.00

Ref No: 785744

View Photos

2008 Mori Seiki DuraTurn 2050

8" Chuck, 20" Centers, 2.5" Bar Capacity, 12 Pos. Turret, Chip Conveyor

$67,000.00

Ref No: 6000630

View Photos

1996 Mori Seiki SL-25 MC/500

MF-T6 Control, Tool Setter, Bar Feeder, Bar Feed Interface, Parts Catcher, 4 Live Tool Holders, Misc. Stationary Holders, Chip Conveyor

$59,500.00

Ref No: 6000111

View Photos

1998 Mori Seiki ZL-15S

Fanuc MF-D6 (16T) CNC Controls, Collet Chuck, 6 Position Lower Turret, 12 Position Upper Turret, Sub Spindle, Parts Catcher, Sub Spindle, Parts Catcher, Coolant Pan, Chip Conveyor

$55,000.00

Ref No: 6018940

View Photos

2002 Mori Seiki CL-2000B

10 Station, 3500 RPM, 8" Chuck, (No Chucks Included, Machines equipped With Collet Nose) Two (2) Machines Available $49,500.00 each

$49,500.00

Ref No: 6019052

View Photos

View Videos

1997 Mori Seiki SL-150-SMC

MSC-518 Control, 26.8" Swing over Bed, 17.9" Swing over Cross Slide, 24.8" Centers, 16.9" Max Turning Diameter, 13.8" Max Length, 5,000 RPM Main, 3,000 Sub, 2.2" Main / 1.7" Sub, 20 HP, Collet Chuck (both spindles), Parts Catcher, Many Live Tool Holders Included UNDER POWER!!

$45,900.00

Ref No: 5999915

View Photos

1997 Mori Seiki CL-25A

20.5" Swing over Bed, 17.7" Max Turn Diam., 17.7" Max Turn Length, 2.6" Bar Cap. / 3.1" Thru Hole, 3,500 RPM, 10 Tools, 20/15 HP, 8" 3 Jaw Chuck, Chip Conveyor, Tailstock, UNDER POWER!

$39,500.00

Ref No: 6018989

Page 1 of 2

29 Machines Available

1 2 Next Last

A CNC Lathe is a serious investment for any machine shop operator. When you buy used CNC equipment from KD Capital, you are already saving money on a large equipment purchase, and you may also be getting a better deal than buying new. Why? - Machine shop owners usually sell the machine with accessories and add-ons that you would have to pay extra for if you bought the machine direct from the manufacturer. You can often find upgraded tool holders, conveyors, coolant systems, and CPU's at a fraction of the purchase price.

KD Capital works with liquidators and equipment auctions from all over the nation. We have access to CNC lathes from all brands including Mori Seiki, Mazak, Hwacheon, Daweoo, Cincinnati, Haas, Modern, Nakamura, and all major manufacturers. To save the time and cost of training, you can outfit your shop with models that your machinists are already familiar with, or you can buy upgraded and newer models that increase efficiency by a wide margin. When you're looking to get the best machine for the job, KD Capital can match you up with the right CNC Lathe, at the right price.