Used CNC Lathes - Daewoo Haas and Mori Seiki Lathe Machines| KDCapital

Machines in the CNC Lathes Category

Re-Sort Results By: Year | Make | Price

Page 1 of 2

29 Machines Available

1 2 Next Last

View Photos

2002 Mori Seiki CL-2000B

10 Station, 3500 RPM, 8" Chuck, (No Chucks Included, Machines equipped With Collet Nose) Two (2) Machines Available $49,500.00 each

$49,500.00

Ref No: 6019052

View Photos

1997 Mori Seiki CL-200A

8" Hyd Chuck, Misc OD & ID, Gantry Loader, Chip Conveyor

$29,500.00

Ref No: 6000702

View Photos

1995 Mori Seiki CL-20A

Fanuc 18T, 8" 3 Jaw Hydraulic Chuck, Parts Catcher, Spego Bar Feed Model 212, Bar Feed Interface, Chip Conveyor

$26,900.00

Ref No: 6000109

View Photos

1995 Mori Seiki CL-20B

Yasnac MX-3 Control, 2.5" Max Bar, 10 HP, 3,500 RPM, 10 Station, Auto Tool Presetter, Catcher, 8" Chuck & 5C Collet Nose

$34,900.00

Ref No: 785738

1995 Mori Seiki CL-25A

Fanuc 18T CNC Cntrl, 8" Chuck, 10 Station, 20 HP, 30000 RPM

$39,500.00

Ref No: 6019051

View Photos

1997 Mori Seiki CL-25A

20.5" Swing over Bed, 17.7" Max Turn Diam., 17.7" Max Turn Length, 2.6" Bar Cap. / 3.1" Thru Hole, 3,500 RPM, 10 Tools, 20/15 HP, 8" 3 Jaw Chuck, Chip Conveyor, Tailstock, UNDER POWER!

$39,500.00

Ref No: 6018989

View Photos

1998 Mori Seiki DL-150Y

5000 RPM, 12 Station, 7.5/10 HP, MSC 518 Control, LNS Quick Load Barfeeder

$119,000.00

Ref No: 786005

View Photos

2007 Mori Seiki DuraTurn 2050

MSC-504 control, 24" Sw Over Bed, 14.1" Max Turn Diam, 20.8" Turn Length, 21.5" Centers, 2.5" Bar Cap, 20 HP, 4,000 RPM, Detachable Tool Setter, Programmable Tailstock, 8" Kitagawa B208 Chuck, Assortment of Boring Bar Holders, Wedges, Clamps, Included…

$72,900.00

Ref No: 6000041

View Photos

2008 Mori Seiki DuraTurn 2050

8" Chuck, 20" Centers, 2.5" Bar Capacity, 12 Pos. Turret, Chip Conveyor

$67,000.00

Ref No: 6000630

View Photos

2001 Mori Seiki LL-7/3500

42" Swing, 144" Centers, 24" Chuck, 750RPM, 60hp, Steady Rest, Conveyor

Price On Request

Ref No: 6000067

View Photos

2005 Mori Seiki MT 2500SZ/1500

5 Axis, 120 Tool, Twin Spindle,

$399,000.00

Ref No: 6000069

View Photos

2004 Mori Seiki NL-1500 MC

6" Chuck, 12 Station Turret, 6,000 RPM, Mitz Control, Chip

$89,900.00

Ref No: 6000106

View Photos

View Videos

1997 Mori Seiki SL-150-SMC

MSC-518 Control, 26.8" Swing over Bed, 17.9" Swing over Cross Slide, 24.8" Centers, 16.9" Max Turning Diameter, 13.8" Max Length, 5,000 RPM Main, 3,000 Sub, 2.2" Main / 1.7" Sub, 20 HP, Collet Chuck (both spindles), Parts Catcher, Many Live Tool Holders Included UNDER POWER!!

$45,900.00

Ref No: 5999915

View Photos

2002 Mori Seiki SL-154

Mori Seiki MSG-805 MAPPS Conversational Programming, 16 C Collet Chuck, 300 PSI Coolant Pump, Tool Presetter, Tool Life Management, Auto Parts Catcher, LNS Eco Auto Load Bar Feed, 6" 3 Jaw Chuck

$69,500.00

Ref No: 785744

View Photos

1999 Mori Seiki SL-200 SMC

5 Axis CNC Mill Turning Center

$79,000.00

Ref No: 6018942

View Photos

1996 Mori Seiki SL-25 MC/500

MF-T6 Control, Tool Setter, Bar Feeder, Bar Feed Interface, Parts Catcher, 4 Live Tool Holders, Misc. Stationary Holders, Chip Conveyor

$59,500.00

Ref No: 6000111

View Photos

1991 Mori Seiki SL-25B

10" Chuck, 2.68"Bar Cap., 10.24" Turn Dia., Fanuc 15TF Control, Turret 10,

$19,900.00

Ref No: 5999563

View Photos

1990 Mori Seiki SL-25MC

Runs Like a Clock, 8" Chuck, 2 5/8", Turn Dia. 12", Live Tool, Parts Catcher,

$29,500.00

Ref No: 786814

View Photos

1996 Mori Seiki SL-25MC

Fanuc Control, Bar Feeder, Live Tooling, Chip Conveyor.

$35,000.00

Ref No: 5999754

View Photos

1989 Mori Seiki SL-35MC/750

3500 RPM, 30HP, 12Station Turret, Live Tool, Chip

$99,000.00

Ref No: 5999892

Page 1 of 2

29 Machines Available

1 2 Next Last

A CNC Lathe is a serious investment for any machine shop operator. When you buy used CNC equipment from KD Capital, you are already saving money on a large equipment purchase, and you may also be getting a better deal than buying new. Why? - Machine shop owners usually sell the machine with accessories and add-ons that you would have to pay extra for if you bought the machine direct from the manufacturer. You can often find upgraded tool holders, conveyors, coolant systems, and CPU's at a fraction of the purchase price.

KD Capital works with liquidators and equipment auctions from all over the nation. We have access to CNC lathes from all brands including Mori Seiki, Mazak, Hwacheon, Daweoo, Cincinnati, Haas, Modern, Nakamura, and all major manufacturers. To save the time and cost of training, you can outfit your shop with models that your machinists are already familiar with, or you can buy upgraded and newer models that increase efficiency by a wide margin. When you're looking to get the best machine for the job, KD Capital can match you up with the right CNC Lathe, at the right price.