Machines in the Blow Molders Category

 Extruder Screw Sizes 40 mm / 25 mm, 80 Ton, Platen Size 29.5" L x 18.11", Face Bar Length - 30", Includes Extra Screws & Barrels (35 mm & 19 mm)…

Single Head Configuration, 2.5" Extruder Screw Size, 75 Horsepower, 38" x 15" Clamp Dimension, AC Variable Drive, Pick-off unit included

Head Configuration Number Of Heads 6, Head Center Spacing 10.50", Programmable Heads, Extruder Screw Size 3.50", L/D Ratio 24:1

Uniloy, Model 5500, (1981 Reconditioned 2002), 4 - Heads, 8.0", Head Centers, 3.5" Extruder Screw Size, 15" x 30" Platen Size, Siemens PLC Controls, Cooling Bed, 1 & .05 Gallon Molds included, 

 Single Head Machine, 4.0" Head Center Spacing, 60 mm Screw Size, 40 Horsepower Motor, 3-Ton Clamp, 11.81" x 8.6" x 6.37" Platen Size, Moog Controller, Approx. HOURS ON MACHINE.....14,528

Head Configuration Number Of Heads 4, Head Center Spacing (2 groups of 2) 14.0", Programmable Heads, Extruder Screw Size 4.00", L/D Ratio  24:1, Horsepower 125 HP AC Motor

(2) Uniloy Accumulator Head Style, Model UMA-35-70-3-DS, 1996, Dual Head, 6 lb. Shot Capacity, 2.75” Extruder, 24:1 L/D, Platen Size 51.2” x 31.5”, 68 HP Motor, 64 Ton Clamping Force, Maco 8000 Controls, Part Take-out Unit….$95,500.00 Each

Single Head, 5 # Shot Capacity, 32" x 36" Platen size, Shut Height 14" - 37", GE Fanuc Controls.

Single Head, 8# Shot Capacity, 32" x 36" Platen Size, Shut Height 14" - 37", GE Fanuc Controls

Accumulator Head Blowmolder, (1998) Single Head, 10# Shot Capacity, 36" x 40" Platen Size, 17.5" - 42" Shut Height, Controls 6500 Controls.

Dual Head 50# Shot Capacity, Dual 6" Extruders @ 300 HP, Dual Clamping Stations, Platen Size 60" x 84" , Dual Parison Programmer, Maco 6500, Easy Mold System, Dual Part Take-out Unit

Dual Head, 30# Shot Capacity, Platen Size 96” W x 78” H, 6” Extruder, 300 HP, Includes Maguire System & Granutec Granulator

Squat 19 Style, 19 Lb Shot / 35 Lb Head, 19# Shot Capacity, Base is originally from 35# Head (Can use larger tooling), includes some tooling, 7" & 11.75 Tooling size

Number Of Cavities - 4, Production Capacity 4800 bottles/hour, Type of Mold Hangers GUPM, Linear Style Oven, Number Of Heating Modules - 6

Dual Head, 1.5" Screw Size, 25 Horsepower, Rocheleau 25 point parison  programmer

Ref # 746348, (2) Norland Int'l PET Blowmolding Package, 2001, Model BM600, Includes Preheaters, Compressor, (3) Sets of Molds (1Ltr, 1.5 Ltr, & 2 Ltr) Excellent Condition, Very Low Hours,

One (1) 2007 Norland International Inc. Model Freedom Series 3000 (Up to 2 Liter Bottle)

Jomar, Model 2.0d, (1998), dual Station, 70 mm Extruder, Includes; 3-sets of tooling , Foremost Granulator & Temptek,

 Tonnage 65 US Tons, Preform Clamp 52 US Tons, Photos available