Machines in the Blow Molders Category

Model 85, Includes, 7-sets of Molds for 100 – 300cc Containers….

Number Of Heads - 1, Shot Size Capacity 2.5 lbs., Platen Size 30" x 30", Shut Height 13" - 39", Head Centers 15", Maco 6500 Controls

Blow Molding Package, Models B-51, (2) Machines, Molds and Support equipment included

Dual Station, Number Of Heads 2 x 75 mm & 125 mm, 2.5" Screw Size, 24:1 L/D, B&R Controls

Dual Station, Number Of Heads 3 x 85mm (PE), 2.5" Screw Size, 24:1 L/D, Siemen Controls

 # OF Heads3 or 4 (both available), Head Centers for 4 Head 84 mm, Head Centers for 3 Head 91 mm, Extruder Screw Size 2",  L/D Ratio 24:1, Horsepower 30, Platen Size 14.5" x 14.5", Clamp Tonnage 10, Max Daylight 18.5", Minimum Daylight 10", Dimensions 103" L x 67" W x 136" H, Controls Moog Programmer

 Head x 125 mm, Lots of Upgrades, Very Nice, Under Power, Upgrades, $59500

 "(4) Station Rotary Indexing Shuttle Blow Molder, (3) Layer Blow Molder (2-2.5" extruders / 1-3.5" extruder), Platen Size 25.6" Width x (2 x 5.118" Depth) x 14" Length, 15 Ton clamp Tonnage, 100 Pt. Parison Programming, Pre-Pinch Knife, Bottle Take-Out & Deflash Unit, VERY LOW USAGE

Blow Molds for "Children's Bath Tub Table", Designed for a Dual Head Accumulator Blow Molder, 3# Shot capacity, 1st Mold Dimensions; 11.5" x 18.5"  x 17.5",   2nd Mold Dimensions; 20.5" x 21.5" x 17.5"

"PET" Stretch Blow Molder, (1988), (2) Cavity Machine, Preheat & Main Oven, Contec Controller, 1800 Bottles/Hour, Includes; 32 oz Molds, 40 Horsepower Kaeser High Pressure Compressor (145/500 PSI - 400 Gallon Tank), 25 Horsepower Twist Air Low Pressure Compressor (120 Gallon Tank), 38 mm & 63 mm Parts

Dual Heads, 8# Shot Size Capacity, 40" x 30" Platen Size, Extruder Screw Size 90mm, 125 Horsepower, Camac 486 Controller,

 Dual Heads, 8 # Shot Size Capacity, 40" x 30" Platen Size, Extruder Screw Size 90 mm, 125 Horsepower, Dual Camac VEL Controls

Dual Cavity, 1200 btls/hr., (2) Sets of molds, Very Clean!

Dual Station, 60 mm Extruder, 30 HP Drive, Maco 8000 Controls

Dual Station Shuttle Machine, 80 mm Screw Size, 50 Horsepower Motor, 24:1 L/D, 13.4" x 18.7" Platen Size, 7.8 Clamp Tonnage, Maco 8000 Controller, INCLUDES; Sterlco Barrel Cooler, Sterling 4-Compartment Blender (900 lbs/hours), Rapid 25 Horsepower Granulator

Research & Development Machine, Dual Sided Machine, Co-extrusion Triple Layer (3-extruders), 13.4" x 18.7" Platen Size, 7.8 Tons Clamping Force, Maco VI Controllers

Continuous Extrusion Blow Molder, Single Station, 55 mm Screw,24:1 L/D Ratio, 25 HP Motor, 431 mm x 304 mm Platen Size, Maco 8000 Controls, 125 mm Head Centers, 40 oz (dual Head)  up to 4 Liter Bottles (single head)

Dual Station, Dual Heads (2 x 125 & 140 mm (PE)), 80 mm Extruder Size, L/D Ratio 24:1, Koyo Automation Controls, Ran HDPE Material, Upgrades include; Extruder Drive (AC Inverter), Access platform, Some Electrical

Model VK 1-5, (1988) “ONLY 4901 hours”, Go up to 10 liter Bottles, Dual 150 mm Heads with parison programming, 60 mm Extruder, 20:1 L/D Ratio, Platen Size 450 (525) x 340 x (2 x 130 or 2 x 155) (mm), Profile 32 Point 2-Channel Parison Programmer (Includes Parison Length Controller - Schleicher PLC)