Machines in the Blow Molders Category

Dual Head 50# Shot Capacity, Dual 6" Extruders @ 300 HP, Dual Clamping Stations, Platen Size 60" x 84" , Dual Parison Programmer, Maco 6500, Easy Mold System, Dual Part Take-out Unit

Dual Head, 30# Shot Capacity, Platen Size 96” W x 78” H, 6” Extruder, 300 HP, Includes Maguire System & Granutec Granulator

 "(4) Station Rotary Indexing Shuttle Blow Molder, (3) Layer Blow Molder (2-2.5" extruders / 1-3.5" extruder), Platen Size 25.6" Width x (2 x 5.118" Depth) x 14" Length, 15 Ton clamp Tonnage, 100 Pt. Parison Programming, Pre-Pinch Knife, Bottle Take-Out & Deflash Unit, VERY LOW USAGE

 Extruder Screw Sizes 40 mm / 25 mm, 80 Ton, Platen Size 29.5" L x 18.11", Face Bar Length - 30", Includes Extra Screws & Barrels (35 mm & 19 mm)…

Dual Station Shuttle Machine, 80 mm Screw Size, 50 Horsepower Motor, 24:1 L/D, 13.4" x 18.7" Platen Size, 7.8 Clamp Tonnage, Maco 8000 Controller, INCLUDES; Sterlco Barrel Cooler, Sterling 4-Compartment Blender (900 lbs/hours), Rapid 25 Horsepower Granulator

Head Configuration Number Of Heads 4, Head Center Spacing (2 groups of 2) 14.0", Programmable Heads, Extruder Screw Size 4.00", L/D Ratio  24:1, Horsepower 125 HP AC Motor

Research & Development Machine, Dual Sided Machine, Co-extrusion Triple Layer (3-extruders), 13.4" x 18.7" Platen Size, 7.8 Tons Clamping Force, Maco VI Controllers

Number Of Cavities - 4, Production Capacity 4800 bottles/hour, Type of Mold Hangers GUPM, Linear Style Oven, Number Of Heating Modules - 6

Jomar, Model 2.0d, (1998), dual Station, 70 mm Extruder, Includes; 3-sets of tooling , Foremost Granulator & Temptek,

Head Configuration Number Of Heads 6, Head Center Spacing 10.50", Programmable Heads, Extruder Screw Size 3.50", L/D Ratio 24:1

One (1) 2007 Norland International Inc. Model Freedom Series 3000 (Up to 2 Liter Bottle)

Model 85, Includes, 7-sets of Molds for 100 – 300cc Containers….

Dual Station, Number Of Heads 3 x 85mm (PE), 2.5" Screw Size, 24:1 L/D, Siemen Controls

Blow Molding Package, Models B-51, (2) Machines, Molds and Support equipment included

Dual Station, Number Of Heads 2 x 75 mm & 125 mm, 2.5" Screw Size, 24:1 L/D, B&R Controls

(2) Uniloy Accumulator Head Style, Model UMA-35-70-3-DS, 1996, Dual Head, 6 lb. Shot Capacity, 2.75” Extruder, 24:1 L/D, Platen Size 51.2” x 31.5”, 68 HP Motor, 64 Ton Clamping Force, Maco 8000 Controls, Part Take-out Unit….$95,500.00 Each

 Dual Heads, 8 # Shot Size Capacity, 40" x 30" Platen Size, Extruder Screw Size 90 mm, 125 Horsepower, Dual Camac VEL Controls

Accumulator Head Blowmolder, (1998) Single Head, 10# Shot Capacity, 36" x 40" Platen Size, 17.5" - 42" Shut Height, Controls 6500 Controls.