Machines in the Blow Molders Category

Ref # 746348, (2) Norland Int'l PET Blowmolding Package, 2001, Model BM600, Includes Preheaters, Compressor, (3) Sets of Molds (1Ltr, 1.5 Ltr, & 2 Ltr) Excellent Condition, Very Low Hours,

Dual Cavity, 1200 btls/hr., (2) Sets of molds, Very Clean!

Uniloy, Model 5500, (1981 Reconditioned 2002), 4 - Heads, 8.0", Head Centers, 3.5" Extruder Screw Size, 15" x 30" Platen Size, Siemens PLC Controls, Cooling Bed, 1 & .05 Gallon Molds included, 

"PET" Stretch Blow Molder, (1988), (2) Cavity Machine, Preheat & Main Oven, Contec Controller, 1800 Bottles/Hour, Includes; 32 oz Molds, 40 Horsepower Kaeser High Pressure Compressor (145/500 PSI - 400 Gallon Tank), 25 Horsepower Twist Air Low Pressure Compressor (120 Gallon Tank), 38 mm & 63 mm Parts

Continuous Extrusion Blow Molder, Single Station, 55 mm Screw,24:1 L/D Ratio, 25 HP Motor, 431 mm x 304 mm Platen Size, Maco 8000 Controls, 125 mm Head Centers, 40 oz (dual Head)  up to 4 Liter Bottles (single head)

Dual Station, 60 mm Extruder, 30 HP Drive, Maco 8000 Controls

Model VK 1-5, (1988) “ONLY 4901 hours”, Go up to 10 liter Bottles, Dual 150 mm Heads with parison programming, 60 mm Extruder, 20:1 L/D Ratio, Platen Size 450 (525) x 340 x (2 x 130 or 2 x 155) (mm), Profile 32 Point 2-Channel Parison Programmer (Includes Parison Length Controller - Schleicher PLC)

Dual Station, Dual Heads (2 x 125 & 140 mm (PE)), 80 mm Extruder Size, L/D Ratio 24:1, Koyo Automation Controls, Ran HDPE Material, Upgrades include; Extruder Drive (AC Inverter), Access platform, Some Electrical

Dual Heads, 8# Shot Size Capacity, 40" x 30" Platen Size, Extruder Screw Size 90mm, 125 Horsepower, Camac 486 Controller,

 Tonnage 65 US Tons, Preform Clamp 52 US Tons, Photos available

 Head x 125 mm, Lots of Upgrades, Very Nice, Under Power, Upgrades, $59500

Dual Head, 1.5" Screw Size, 25 Horsepower, Rocheleau 25 point parison  programmer

Single Head, 8# Shot Capacity, 32" x 36" Platen Size, Shut Height 14" - 37", GE Fanuc Controls

Single Head Configuration, 2.5" Extruder Screw Size, 75 Horsepower, 38" x 15" Clamp Dimension, AC Variable Drive, Pick-off unit included

 Single Head Machine, 4.0" Head Center Spacing, 60 mm Screw Size, 40 Horsepower Motor, 3-Ton Clamp, 11.81" x 8.6" x 6.37" Platen Size, Moog Controller, Approx. HOURS ON MACHINE.....14,528

Number Of Heads - 1, Shot Size Capacity 2.5 lbs., Platen Size 30" x 30", Shut Height 13" - 39", Head Centers 15", Maco 6500 Controls

Single Head, 5 # Shot Capacity, 32" x 36" Platen size, Shut Height 14" - 37", GE Fanuc Controls.

 # OF Heads3 or 4 (both available), Head Centers for 4 Head 84 mm, Head Centers for 3 Head 91 mm, Extruder Screw Size 2",  L/D Ratio 24:1, Horsepower 30, Platen Size 14.5" x 14.5", Clamp Tonnage 10, Max Daylight 18.5", Minimum Daylight 10", Dimensions 103" L x 67" W x 136" H, Controls Moog Programmer

Blow Molds for "Children's Bath Tub Table", Designed for a Dual Head Accumulator Blow Molder, 3# Shot capacity, 1st Mold Dimensions; 11.5" x 18.5"  x 17.5",   2nd Mold Dimensions; 20.5" x 21.5" x 17.5"

Squat 19 Style, 19 Lb Shot / 35 Lb Head, 19# Shot Capacity, Base is originally from 35# Head (Can use larger tooling), includes some tooling, 7" & 11.75 Tooling size