Machines in the Blow Molders Category

Dual Head, 30# Shot Capacity, Platen Size 96” W x 78” H, 6” Extruder, 300 HP, Includes Maguire System & Granutec Granulator

Blow Molds for "Children's Bath Tub Table", Designed for a Dual Head Accumulator Blow Molder, 3# Shot capacity, 1st Mold Dimensions; 11.5" x 18.5"  x 17.5",   2nd Mold Dimensions; 20.5" x 21.5" x 17.5"

Blow Molding Package, Models B-51, (2) Machines, Molds and Support equipment included

Single Head, 8# Shot Capacity, 32" x 36" Platen Size, Shut Height 14" - 37", GE Fanuc Controls

Single Head, 5 # Shot Capacity, 32" x 36" Platen size, Shut Height 14" - 37", GE Fanuc Controls.

Dual Head 50# Shot Capacity, Dual 6" Extruders @ 300 HP, Dual Clamping Stations, Platen Size 60" x 84" , Dual Parison Programmer, Maco 6500, Easy Mold System, Dual Part Take-out Unit

Squat 19 Style, 19 Lb Shot / 35 Lb Head, 19# Shot Capacity, Base is originally from 35# Head (Can use larger tooling), includes some tooling, 7" & 11.75 Tooling size

Single Head Configuration, 2.5" Extruder Screw Size, 75 Horsepower, 38" x 15" Clamp Dimension, AC Variable Drive, Pick-off unit included

Uniloy, Model 5500, (1981 Reconditioned 2002), 4 - Heads, 8.0", Head Centers, 3.5" Extruder Screw Size, 15" x 30" Platen Size, Siemens PLC Controls, Cooling Bed, 1 & .05 Gallon Molds included, 

Dual Station, Dual Heads (2 x 125 & 140 mm (PE)), 80 mm Extruder Size, L/D Ratio 24:1, Koyo Automation Controls, Ran HDPE Material, Upgrades include; Extruder Drive (AC Inverter), Access platform, Some Electrical

Model 85, Includes, 7-sets of Molds for 100 – 300cc Containers….

Research & Development Machine, Dual Sided Machine, Co-extrusion Triple Layer (3-extruders), 13.4" x 18.7" Platen Size, 7.8 Tons Clamping Force, Maco VI Controllers

 Head x 125 mm, Lots of Upgrades, Very Nice, Under Power, Upgrades, $59500

 Single Head Machine, 4.0" Head Center Spacing, 60 mm Screw Size, 40 Horsepower Motor, 3-Ton Clamp, 11.81" x 8.6" x 6.37" Platen Size, Moog Controller, Approx. HOURS ON MACHINE.....14,528

Model VK 1-5, (1988) “ONLY 4901 hours”, Go up to 10 liter Bottles, Dual 150 mm Heads with parison programming, 60 mm Extruder, 20:1 L/D Ratio, Platen Size 450 (525) x 340 x (2 x 130 or 2 x 155) (mm), Profile 32 Point 2-Channel Parison Programmer (Includes Parison Length Controller - Schleicher PLC)

"PET" Stretch Blow Molder, (1988), (2) Cavity Machine, Preheat & Main Oven, Contec Controller, 1800 Bottles/Hour, Includes; 32 oz Molds, 40 Horsepower Kaeser High Pressure Compressor (145/500 PSI - 400 Gallon Tank), 25 Horsepower Twist Air Low Pressure Compressor (120 Gallon Tank), 38 mm & 63 mm Parts

 # OF Heads3 or 4 (both available), Head Centers for 4 Head 84 mm, Head Centers for 3 Head 91 mm, Extruder Screw Size 2",  L/D Ratio 24:1, Horsepower 30, Platen Size 14.5" x 14.5", Clamp Tonnage 10, Max Daylight 18.5", Minimum Daylight 10", Dimensions 103" L x 67" W x 136" H, Controls Moog Programmer

Continuous Extrusion Blow Molder, Single Station, 55 mm Screw,24:1 L/D Ratio, 25 HP Motor, 431 mm x 304 mm Platen Size, Maco 8000 Controls, 125 mm Head Centers, 40 oz (dual Head)  up to 4 Liter Bottles (single head)