Machines in the Blow Molders Category

One (1) 2007 Norland International Inc. Model Freedom Series 3000 (Up to 2 Liter Bottle)

Dual Head, 1.5" Screw Size, 25 Horsepower, Rocheleau 25 point parison  programmer

Ref # 746348, (2) Norland Int'l PET Blowmolding Package, 2001, Model BM600, Includes Preheaters, Compressor, (3) Sets of Molds (1Ltr, 1.5 Ltr, & 2 Ltr) Excellent Condition, Very Low Hours,

Dual Station, Number Of Heads 3 x 85mm (PE), 2.5" Screw Size, 24:1 L/D, Siemen Controls

 Tonnage 65 US Tons, Preform Clamp 52 US Tons, Photos available

Single Head Configuration, Shot Size Capacity - 74 Ounces, 30" x 30" Platen Size, 3.75" Screw Size, 20:1 L/D Ratio, 75 Horsepower, 33 Tons Clamping Force,

Jomar, Model 2.0d, (1998), dual Station, 70 mm Extruder, Includes; 3-sets of tooling , Foremost Granulator & Temptek,

Clamp Force 16 Tons, Clamping Device 550 mm x 900 mm Hydraulic, (45 degree fixed angle) , Clamp Stroke 300 mm - 1000 mm, Max Die, Height 450 mm, Screw Diameter  65 mm, Die Max Diameter 100 mm

Accumulator Head Blowmolder, (1998) Single Head, 10# Shot Capacity, 36" x 40" Platen Size, 17.5" - 42" Shut Height, Controls 6500 Controls.

Dual Head, 30# Shot Capacity, Platen Size 96” W x 78” H, 6” Extruder, 300 HP, Includes Maguire System & Granutec Granulator

Head Configuration Number Of Heads 6, Head Center Spacing 10.50", Programmable Heads, Extruder Screw Size 3.50", L/D Ratio 24:1

Head Configuration Number Of Heads 4, Head Center Spacing (2 groups of 2) 14.0", Programmable Heads, Extruder Screw Size 4.00", L/D Ratio  24:1, Horsepower 125 HP AC Motor

Dual Station, 60 mm Extruder, 30 HP Drive, Maco 8000 Controls

(2) Uniloy Accumulator Head Style, Model UMA-35-70-3-DS, 1996, Dual Head, 6 lb. Shot Capacity, 2.75” Extruder, 24:1 L/D, Platen Size 51.2” x 31.5”, 68 HP Motor, 64 Ton Clamping Force, Maco 8000 Controls, Part Take-out Unit….$95,500.00 Each

Number Of Heads - 1, Shot Size Capacity 2.5 lbs., Platen Size 30" x 30", Shut Height 13" - 39", Head Centers 15", Maco 6500 Controls

6 1/8" Head Centers

4-Head Machine One Gallon Machine, 10.125” Head Centers, 21” x 44” Clamp size with side shift, 125 HP DC Motor, Includes, Cooling Bed, Pick & Place, Trimmer (model 10041 with “S” Bar), 9” Trimmer Centers, Bottle Blow Over,

 # OF Heads3 or 4 (both available), Head Centers for 4 Head 84 mm, Head Centers for 3 Head 91 mm, Extruder Screw Size 2",  L/D Ratio 24:1, Horsepower 30, Platen Size 14.5" x 14.5", Clamp Tonnage 10, Max Daylight 18.5", Minimum Daylight 10", Dimensions 103" L x 67" W x 136" H, Controls Moog Programmer

 Head x 125 mm, Lots of Upgrades, Very Nice, Under Power, Upgrades, $59500