Plastic Extruders - Used Air and Water Cooled Extruders

Machines in the Extruders Category

Filter by Make

AEC Whitlock (1)	Akron (1)	American Kuhne (2)
Berstoff (1)	Black Clawson (1)	Cincinnati (3)
Crown (1)	Davis Standard (6)	EDI (1)
Egan (2)	Extruder Crammer Feeder (1)	Gatto Cat-A-Cutter (1)
Hartig (1)	HPM (2)	Killion (1)
Littleford (1)	Motan (1)	MPM (1)
NFM (1)	NRM (3)	Parkinson (1)
Prodex (1)	Sterling (1)	Welex (2)
Youngstown (1)

Re-Sort Results By: Year | Make | Price

Page 2 of 2

38 Machines Available

First Prev 1 2

1979 Gatto Cat-A-Cutter ERC-40

4” Capacity, Flywheel Style

$950.00

Ref No: 784755

Hartig Single Screw Extruder

(Re-furbished 1986) 6.0” Screw Size, 24:1 L/D Ratio, “Vented”, Water cooled, 250 HP, 6-Heater Zones, includes; control panel, heat exchanger, Screen changer, hydraulic pump

$29,500.00

Ref No: 785338

HPM Complete Extrusion Pelletizing/Reclaim Line

1- 8.0" HPM Extruder, 40:1 L/D Ratio, Vented, Air Cooled, 500 HP DC Motor, 16 Zones, SCR Drive, Hydraulic Screen, Changer, 1-Beringer Pelletizer, Model WRP-35S, Ran PP Regrind Flake

$225,000.00

Ref No: 785898

1981 HPM Extrusion Profile Line

(1) 2.5" HPM, 24:1 L/D Ratio, Air Cooled, 40 HP, Digital Controls, Gatto Vacuum Tank, Gatto Puller, Gatto Cat-A-Cutter

$9,950.00

Ref No: 784887

1990 Killion KTS-100

Pedestal Extruder, .75" Screw Size, 15:1 L/D, Air Cooled, 2 HP, 4 Barrel Zones, Barber Coleman Controls

$7,950.00

Ref No: 767214

Littleford Miter/Cooler

Capacity 600 Liter, Horsepower 125, Includes Weigh Hopper , Controls, Photos available

$29,500.00

Ref No: 785742

1998 Motan MDS 1200 Version 6

1200 lb./hour Capacity, 480v

$9,750.00

Ref No: 786164

MPM Single Screw Extruder

2.5”, 24:1 L/D Ratio, Air Cooled, 40 HP, Digital Controls, Allen-Bradley Drive, New Barrel/Screw, Motor, Gearbox

$5,950.00

Ref No: 767425

2003 NFM Twin Screw Compounding Extruder

20mm, 54:1 L/D Ration, 10 HP, 5 Electrical Barrel Heater Zones, "46 Hours of use"

$82,500.00

Ref No: 745840

NRM Pacemaker 70

24:1 L/D Ratio, Water Cooled, Non-Vented, 150 HP, Allen-Bradley Controls, Beringer Model WRP12, Crammer Feeder, Screen Changer

$49,500.00

Ref No: 767111

NRM Pacemaker 70 Model

NRM Pacemaker 70, Complete Blow Film Line, Currently Under Power, 3.5" 24:1 L/D Ratio, 14" Rotational Bubble Extrusion Die, Refurb. Line, Complete System with tower, Excellent for Producing Plastic Bag Roll-Stock

$99,500.00

Ref No: 746094

NRM Single Screw Extruder

3.5", 24:1 L/D ratio, Air Cooled, Maddox Mixing Screw, 100 Horsepower, Digital Controls, Material Ran Flexible PVC

$16,500.00

Ref No: 786176

2000 Parkinson Plastic Sheet Winder

torque tensioning, (2000), Max Material Width-60”/24” min, Material Thickness .030
Min/.080 max, Max Speed 30 FPM (foot per minute), Max Roll Weight 870 lbs, Very lows

$99,500.00

Ref No: 785234

Prodex 4.5" Complete Sheetline

Line #1 Prodex Extruder (Rebuilt by Crown), Screw Type 94 Barrier, Screw Size 4.5", L/D Ratio 30:1, Horsepower 20, Material Ran PE
Line #2 Sterling Extruder, Screw Type 96 Barrier / 82 Barrel, Screw Size 4.5", L/D Ratio 24:1, Horsepower 200, Gear Box Ratio 14.1:1

$99,500.00

Ref No: 785791

Sterling 4.5" Complete Sheetline

$99,500.00

Ref No: 785791

1979 Welex Extrusion Profile Line

Includes; (1) 2.5" Welex Extruder, 24:1 L/D, Air Cooled, 40 HP, Gatto Vacuum Sizing Tank, Gatto Cat-A-Puller, Gatto Cutter

$9,950.00

Ref No: 784890

1980 Welex Extrusion Sheet Line

30:1 L/D Ratio, Vented, Water cooled, 60 Horsepower, RAN LDPE, Lab/Pilot Sheetline, Welex Chrome Chill Rolls (3-Roll Strack), Welex Rewind Station, Hopper Loader, 26" Wide Ultraflex Die

$49,500.00

Ref No: 786050

2003 Youngstown MET 3/4 20 "Little Mike"

"Lab Extruder", .75" Screw Size, 24:1 L/D Ration, 1.5 HP, 10:1 Gearbox Ratio

$19,500.00

Ref No: 745845

Page 2 of 2

38 Machines Available

First Prev 1 2