Machines in the Extruders Category

3.5" Screw Size, 28:1 L/D Ratio, Vented, Water Cooled, 5-Barrel Zones, 16.94:1 Gear Box Ratio, 100 Horsepower, Omron E5CK Controller,  Includes (2) extra screws

Includes, (1) Egan Extruder, 6.0”, 30:1 L/D Ratio, 400 HP, 80” EDI Die, Crown Chrome Rolls 80” x 24”,             Wysong Shear

 Models Ultraflex HR-75 ($17,500.00) & H-75 ($16,500.00) no restrictor bars

2.5” Screw Size, 30:1 L/D Ratio, Air Cooled, (6) Cooling Zones, GE Kinamatic 40 Horsepower Motor, Cutler Hammer Drive,

Includes; (1) 58mm Crown Extruder, 40:1 L/D Ratio, 150 Horsepower, 12 Zones, Vented, Nema Controller, Hydraulic Slide Plate Screen Changer, (1) Crown Under Water Pelletizing System, Model CUW EZ-FLOW, “0” hours of use………

 Includes; (1) Crown 4.5” Extruder, 30:1 L/D, 400 HP, “Vented”, 80” Sheet Die, Crown (3) Roll            Chrome Stack – 80” x 24”, Crown Puller, Wysong Shear

114" 1996 Conair Vacuum Sizing Tank, Model PVST105C954

26" Diameter Up-acting Blade, Traveling Table, Pneumatic Regulated Table/Clamping, Durant Totalizer, Length Coder, Vacuum System....$11,500.00

(2) Conair, Model PB6-36 Pullers, 6" x 36" Contact Area, 2 - Belts, Contrex M-Trim, Programmable Digital Motor Speed Controller

Contact Area 8" x 50", Rubber Cleats upper & lower, Independent Gear Drives, Pneumatic Pressure Adjustment, 1 - 10 FPM, Contrex M-Trim Programmable FPM Control, Baldor Drive

Screw Size 55 mm, L/D Ratio 22:1, Electrically Heated, 40 Horsepower, INCLUDES; Crammer Feeder, Hopper, Pallet of Spare Parts VERY CLEAN

Conical Rotating Twin Screw, 92 mm Screw Size, 150 Horsepower, Ran PVC, Has Cooling System for Rigid Vinyl, 6" Feed Throut Diameter

18" Vacuum Sizing Tank, Dimension 16"w x 14" h x 216", includes pump, basket filter, Heat exchanger, overall length - 228"

Screw Size 25mm, L/D Ratio 28:1, 2- Co-Rotationg Intermeshing Screws, Eurotherm Controls

• 90 mm Berstorf / Gala Under Water Pelletizing Line, Includes; 1982 Berstorff 90 mm Co-Rotating Twin Screw, 24:1 L/D Ratio, Vented & Plugged, 400 Horsepower, Gala under water pelletizer, Model # 6, Includes a lot of additional extruder parts, Currently Under Power….$179,500.00 O.B.O.

 Co-Rotating Screw Configuration, 62 mm Size Screw, Electrically Heated Barrel, Vented Barrel, Water Cooled Screws, 40 - Horsepower, RAN PVC COMPOUND FOR WINDOW PROFILES

 Screw Size   41 mm, BMC Touch Screen, Measuring & Display of Melt Pressure, Melt Pressure Transducer, SF-1 Single Screw Wire Feeder, Stepdown Transformer 45 KVA  

includes (2) 3.5” American Kuhne Extruders, Models AK350, 24:1 L/D, S/n’s, 1305 & 1301, 75 hp motors, Conair 11” x 12” x 16’ Vacuum Sizer, Stainless Steel Cooling Tank w/ reserve pump & heat Exchanger, 2nd cooling tank w/ multi-pass capabilities, pullers, Linex Jet A Mark inkjet Printer, 24 Head Spiral Knitting Machine Mdl. 1500, Has 60” x 60” Single Position Spool Coiler, including spare spools

 “Push / Pull Material Transfer System” Includes Recievers