Machines in the Extruders Category

18" Vacuum Sizing Tank, Dimension 16"w x 14" h x 216", includes pump, basket filter, Heat exchanger, overall length - 228"

26" Diameter Up-acting Blade, Traveling Table, Pneumatic Regulated Table/Clamping, Durant Totalizer, Length Coder, Vacuum System....$11,500.00

(2) Conair, Model PB6-36 Pullers, 6" x 36" Contact Area, 2 - Belts, Contrex M-Trim, Programmable Digital Motor Speed Controller

 Includes; (1) Crown 4.5” Extruder, 30:1 L/D, 400 HP, “Vented”, 80” Sheet Die, Crown (3) Roll            Chrome Stack – 80” x 24”, Crown Puller, Wysong Shear

 Models Ultraflex HR-75 ($17,500.00) & H-75 ($16,500.00) no restrictor bars

45” Wide, Includes, (1) 3.5” Egan Extruder, 28:1 L/D Ratio, Water Cooled, 100 Horsepower, Controls, 45” Wide Sheet Die, 3-Roll Vertical Chrome Stack 45” x 12” OD (2005), Screen Changer,

3.5" Screw Size, 28:1 L/D Ratio, Vented, Water Cooled, 5-Barrel Zones, 16.94:1 Gear Box Ratio, 100 Horsepower, Omron E5CK Controller,  Includes (2) extra screws

Includes, (1) Egan Extruder, 6.0”, 30:1 L/D Ratio, 400 HP, 80” EDI Die, Crown Chrome Rolls 80” x 24”,             Wysong Shear

Contact Area 6" x 48", (4) Speed Gear Box, With Contrex M-Drive Programmable Length Control

Used 10" Gatto Traveling Saw, Model HS-2-4, 2" Height Max, 4" Max Width, 2" Dia Max, S/N 745100 460/60/3…..$3500.00

(Re-furbished 1986) 6.0” Screw Size, 24:1 L/D Ratio, “Vented”, Water cooled, 250 HP, 6-Heater Zones, includes; control panel, heat exchanger, Screen changer, hydraulic pump

3.5" Screw Size, 30:1 L/D Ratio, 75 Horsepower, Air Cooled, New Drive, New Controller, Rebuilt Gear Box with new gears/seals

 24:1 L/D Ratio, 150 Horsepower, Water Cooled, High Torque Screw, Quantum III Digital Drive, FXM Field Controller

24:1 L/D Ratio, Water Cooled, Non-Vented, 150 HP, Allen-Bradley Controls, Beringer Model WRP12, Crammer Feeder, Screen Changer

NRM Pacemaker 70, Complete Blow Film Line, Currently Under Power,  3.5" 24:1 L/D Ratio, 14" Rotational Bubble Extrusion Die, Refurb. Line, Complete System with tower, Excellent for Producing Plastic Bag Roll-Stock

3.5", 24:1 L/D Ratio, 75 HP, Includes Cooling Tanks, Puller & Cut-Off Saw

"Can Be Used For Polystyrene!", Includes; 4.5" Sterling Extruder, 34;1 L/D Ratio, Vented, Water Cooled, 400 Horsepower DC Motor, Sabina Drive, Beringer Screen Changer, Gala Pelletizing Unit, Model SLC 6, TWS80 Tempered Water System, Spin Dryer, 8.2BF

4” Capacity, Flywheel Style

• 90 mm Berstorf / Gala Under Water Pelletizing Line, Includes; 1982 Berstorff 90 mm Co-Rotating Twin Screw, 24:1 L/D Ratio, Vented & Plugged, 400 Horsepower, Gala under water pelletizer, Model # 6, Includes a lot of additional extruder parts, Currently Under Power….$179,500.00 O.B.O.

2.0" Screw Size, 24:1 L/D Ratio, 25 Horsepower, Mentor Drive, Air Cooled, Barber Coleman Controls, 460v, VERY CLEAN