In order to reveal the price, please click the Activate Pricing button below and complete the form on the following page.
You will need to complete this form only once. After filling out the form please go to your email and click on the link provided to activate the prices.
You will need to close out your current browser and reopen a new browser in order to see the prices. Note: If you are activating the pricing from your cell phone, tablet or a different web browser than the one you used to activate the pricing, you will need to use the re-verify option. Simply enter your email on any device or browser and you will be able to see the prices.
For multiple browser/device users, each browser will need its own verification and you can do that by simply re-verifying your email. i.e Google Chrome, Firefox, Internet Explorer, Safari.
Please note that due to customers' requests, some machinery may still show as "Call for Price". Please call our office for further information regarding those machines or fill out a inquire request on our website for more information.
If you have previously activated prices from this device or any other device and can no longer view them, please re-verify using your email address.
If you encounter any problems activating the pricing, please call us for assistance.
Platen Size 133" x 122", Distance Between Tie Bars 90.5 " x 78.7", Max Daylight173.2", Mold Opening Stroke 129.9", Hydraulic Ejector-Stroke 19.6", Equipped With: Transportation and Installation included
Platen 98.1" x 81.9", Tie Bar Spacing 70.9" x 55.1", Max Stroke 70.9", Open Daylight 153", Min / Max Mold Height 35.4" / 63", Ejector Stroke 11.8", Equipped with: MACO IV Control, Husky Full Servo Robot Included, 2 CP per Platen with Proportional Valving, Hydraulic Valve Gate, HKO, Integrated hot runner controls, Integrated internal mold heaters, Approx. 74,000 hours
Platen 76" x 76", Tie Bar Spacing 52" x 52", Daylight 123", Clamp Stroke 60", Mold Thickness 30", Equipped with: Pathfinder 3000 Control (replaced in 2012), (2) CP, Barrel and motor rebuilt in 2014, All electrical and hydraulic completely rebuilt in 2012, Whittmann Robot - 75lb capacity
Platen 76.77" x 68.9", Tie Bar Spacing 40" x 44", Min / Max Mold 15.75" / 39.37", Daylight 94.49", Knock Out Stroke 15.75", Electrics 575V, Equipped with: EC Control, Dimensions 533" x 130" x 105", Weight 147,200 lbs, HKO, CP, Air Blow, Includes used Yushin Robot, Model Netliner VN11-EA-850S
Tie Bar Spacing 50" x 50", Max Daylight 102.35", Max Stroke 55.11", Min / Max Mold Height 19.69" / 47.24", Equipped with: HUMMA S Control, STAR Servo Robot, Two core pulls, one each platen, Robot interface with threading, Power operator door, Hopper inspection platform, Hydraulic mold clamps
Platen 60.24" x 60.24", Tie Bar Spacing 41.73" x 41.73", Min / Max Mold Thickness 15.98" / 45", Ejector Stroke 7.87", Clamp Stroke 48.03", Max Daylight 93.43", Screw Stroke 28.15", Screw Diameter 5.91", Clamp Dimension 285.43" x 123.62" x 134.64", Injection Dimension 202.75" x 125.19" x 107.08", Clamp Weight 99,210 lbs, Injection Unit Weight 28,660 lbs, Equipped with: NC-9000G Control, HKO, CP, RI, Under Power on the west coast! Includes: Star Robot, Model # TWS-1300FMC
Platen: 60.25" x 60.25", Distance Between Tie Bars: 39.75" x 44.1", Min / Max Daylight: 85.04", Voltage: 480, Dimensions: 33' x 10' x 10', Equipped with: Command 4500c Control, HKO, CP, Hours: 23,701, Under Power !!
Tie Bar Space 48" x 48", Min Mold Height 45.31", Max Mold Height 65.01", Opening Stroke 39.4", Ejector Stroke 11.82", Equipped with: Several Air Circuits, Several Core Pulls, Integrated 24 Zone Hot Runner Control, Integrated 12 Zone Hot Tip Control, Stack Mold Support Option, 2 Mold Spacers For Smaller Mold (12" each), Clamp Lock Up Switch, Robot Interface
Platen 57.1" x 60", Tie Bar Spacing 40.16" x 40.16", Max Daylight 78.74", Min / Max Mold Height 15.75" / 39.37", Max Clamp Stroke 39.37", Ejector Stroke 9.84", Electrics 230V, 3Phase, 60Hz, Dimensions 424" x 109" x 105", Weight 91,000 lbs, Equipped with: Extreme ST Control, Robot Interface, Closed Loop Feed Throat Control, Two State Air Eject
Tie Bar Spacing 40.35" x 36.42", Platen 59.06" x 54.72", Clamp Stroke 35.43", Min / Max Mold Height 15.75" / 36.22", Min / Max Daylight 15.75" / 71.65", Ejector Stroke 9.84", Electrics 460V, Dimensions, 384" x 105" x 104", Weight 105,600 lbs, Equipped with: CC100 Control, Retrofit for New Moog Pilot Valve Was Done, High Speed Accumulator Pkg For Injection, SPI, Air Blow, Under Power!
Find the Right Piece of Equipment for the Plastic Injection Molding You Need
At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.
We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.
If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at firstname.lastname@example.org. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years of combined experience in the business, you can trust the quality of the machines and services K.D. Capital provides.