Used Plastic Injection Molding Machines - Buy Plastic Machines

Machines in the Plastic Injection Molding Category

Page 1 of 1

11 Machines Available

View Photos

1996 Engel ES-2000/500

Max Clamp Stroke 27.5", Min / Max Mold Height 11.81" / 37.87", Tie Bar Spacing 34.64" x 33", Platen Size 49.3" x 62.67", Equipped With:
CC-100 Control, Robot Interface, Accumulator Package, High Speed (40" Per sec), Extended Tie Bar (Option), Dual Core Pull, Quick Mold , Mounts, Extra Heat Option, Additional Outlets: 460 V / 3PH / 60 Amp

$55,900.00

Ref No: 785551

Tonnage: 500.0

Shot Size: 50.6

View Photos

1996 Engel ES-2000/500

Max Clamp Stroke 27.56", Min / Max Mold Height 11.813" / 37.87", Tie Bar Spacing 34.64", Platen Size 48.81" x 47.24", Equipped With:
CC-100 A02 Control, Air Blow, Core Pull, Extended Tie Bars, SPI Robot Interface

$53,500.00

Ref No: 785554

Tonnage: 500.0

Shot Size: 50.6

View Photos

1995 Engel ES-2000/450

Tie Bar Spacing 33" x 33", Platen Size 43.78" x 43.39", Max Clamp Stroke 27.56", Mold Height Min / Max 11.813" / 61.50",
Equipped With: , CC-90 Control, (3) Core Pulls, Air Blow , Retractable Tie Bar Option, 1994 Also Available for $26,500.00

$29,500.00

Ref No: 6000414

Tonnage: 450.0

Shot Size: 38.7

View Photos

1996 Engel ES 2000/400

Platen Size 43.78" x 43.39", Distance Between Tie Bars 30" x 30", Mininum/Maximum Mold Height 11.81"/33.94", Minimum/Maximum Daylight 11.81"/61.50", Clamp Sroke (Maximum) 27.56", Dimensions (L x W x H) 359" x 87" x 101", Weight 45,200 lbs, Equipped With CC 90 EL A02 Controls, Air Blow, Quick mold Change, Accumulator Package, Pneumatic Valve Gate Control, Independent Double Core Pull, Ceramic Heate Bands, Xaloy 102 Barrel, CPM9V Screw Tip and Upgraded Screw, SPI Robot Interface, Power Outlets: (4) 30A 460V, (4) 15A, 120 Two machine available $54,900.00 Each

$54,900.00

Ref No: 786491

Tonnage: 400.0

Shot Size: 38.7

View Photos

2005 Engel ES700H/300 VRB

Hydraulic Clamp, Equipped With CC100 Controller , 62" Rotary Table, Novatec Hopper Loader

$199,500.00

Ref No: 785896

Tonnage: 300.0

Shot Size: 12.7

View Photos

1994 Engel ES300/200

Platen Size 31.8" x 17.72", Max Daylight 29.13", Equipped With: EC88 Control, 4 Station Rotary Table 46.45" Diameter

$27,500.00

Ref No: 785752

Tonnage: 200.0

Shot Size: 8.3

View Photos

2002 Engel ES330/200 VHR13EC100

Pitch Circle Diameter 25.59", Standard Table Diameter 46.46", Injection Pressure 30,000 PSI, Screw Diameter 1.182", Motors 460V/3Ph/60Hz, Mold Heaters 230V, EC100 Control, Rotary Table, Loaded With Options, !!!ONLY 20,000 HOURS!!!

$149,500.00

Ref No: 767059

Tonnage: 200.0

Shot Size: 6.9

View Photos

1998 Engel ES600/150

Tie Bar Spacing 19.69" x 16.54", Platen Size 28.35" x 25.20", Clamp Stroke 16.54", Min / Max Mold Height 5.91" / 20.47", Max Daylight 37.01", Equipped With: EC100 , Auto Clamp Force Control, SPI Robot Interface, Apex Sprue Picker, Hours: 24,424 Hours, Electrics: 480 Volt,
Dimensions: 225" x 66" x 84", Weight 4,884 lbs

$22,500.00

Ref No: 767081

Tonnage: 150.0

Shot Size: 13

View Photos

1994 Engel ES330/125 VHRB

Table: Size 46.46", Stations 2 & 3 Stations, Platen Size 31.89" x 17.72", Daylight Min / Max 15.75" - 31.5", Clamp Stroke 15.75"
Equipped With:, EC-88 Closed Loop Control Light Curtain, Air Blow Filtroil, Xaloy Barrel & D2 Screw PD Graphics & Reports, QDS Auto Heat Up, EMS Interface

$24,900.00

Ref No: 5999540

Tonnage: 125.0

Shot Size: 5.4

View Photos

1993 Engel ES330/80HL

Max Platen Distance 29.53", Mold Size 28.74" x 16.54", Screw Diameter 1.182", Voltage 480/3/60, Dimensions 15' l x 5' w x 6' h, Weight 12,980 lbs, Equipped With Engel A021-EC 88 Control

$14,500.00

Ref No: 6000241

Tonnage: 80.0

Shot Size: 5

View Photos

1998 Engel ES330/70HL

Max Platen Distance 29.53", Mold Size 28.74" x 16.54", Screw Diameter 1.182", Voltage 480/3/60, Dimensions 12'l x 5' w x 6' h Weight , 2,980 lbs, Equipped With EC-100 Control, Hot Runners, 2 Hydraulic Cores, Shut Off Nozzle

$22,900.00

Ref No: 767035

Tonnage: 70.0

Shot Size: 3.7

Page 1 of 1

11 Machines Available

Find the Right Piece of Equipment for the Plastic Injection Molding You Need

At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.

We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.

If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years of combined experience in the business, you can trust the quality of the machines and services K.D. Capital provides.