Used Plastic Injection Molding Machines - Buy Plastic Machines| KDCapital

Machines in the Plastic Injection Molding Category

Page 1 of 1

6 Machines Available

View Photos

View Videos

1995 Toshiba ISGT720

Tie Bar Spacing 37.7" x 37.7", Platen 55.1" x 55.1", Daylight Max. 70.9", Daylight Min. 17.7", Clamp Hydraulic, Clamp Stroke 3", Daylight Max: 70.9", Daylight Min:17.7", Max Mold Ht:37.4", Min. Mold Ht: 17.7, Machine Dimensions 345"L x 104"W x 102"H, Machine Weight 70,000Lbs,Voltage 208, Equipped with V10 Control, HKO, CP, RI!!!UNDER POWER!!!!! Also Available 1993 720 Ton 140 oz Injectvisor Control Price on Request

Call For Price

Ref No: 6019070

Tonnage: 720.0

Shot Size: 140

View Photos

2000 Toshiba ISGT720-59B

Platen Size 55.1" x 55.1", Tie Bar Spacing 37.7" x 37.7", Clamp Stroke 53", Ejector Stroke 7.9", Min/Max Daylight 17.7" / 70.9", Min/Max Mold Ht 17.7" / 37.4", Dimensions L x W x H 28'7" x 8'2" x 8'-2", Weight 64,900 lbs., Equipped With V10 Control, HKO, CP, Under Power

$99,500.00

Ref No: 6000386

Tonnage: 720.0

Shot Size: 126

View Photos

1993 Toshiba ISF610-59

Tie Bar Spacing 33.8" x 33.8", Platens 48.4" x 48.4", Ejector Tonnage 16, Ejector Stroke 6.3", Clamp Hydraulic, Clamp Stroke 47", Daylight Max 63", Daylight Min 15.8", Weight 59000 Lbs, Length 398", Width 71", Height 87", Equipped With: Injectvisor VL Control
HKO, CP, Air Blow, UNDER POWER, 480 Volt

$12,500.00

Ref No: 785110

Tonnage: 610.0

Shot Size: 102

View Photos

1992 Toshiba ISF500-SII-34B

Capacity 500 Ton, Shot Size 77oz, Tie Bar Spacing 31.8" x 31.8", Platen Size 45.7" x 45.7", Maximum Daylight 55.1", Clamp Stroke 39", 75 HP, Equipped With Injectvisor SII Control, HKO, CP, Motion-No-Motion

Call For Price

Ref No: 786155

Tonnage: 500.0

Shot Size: 77

View Photos

View Videos

1995 Toshiba ISGS-390-19AT

Between Tie Bars 28.7" x 28.7", Platen Dimensions 40.1" x 40.1", Max Daylight Opening 49.2", Max Clamp Stroke 37.0", Dimensions 279" x 79" x 84", 37,500 Lbs Equipped With Injectvisor S-10 Control, HKO, CP, RI, Two Machines Available $39,500.00 Each

$39,500.00

Ref No: 6000617

Tonnage: 390.0

Shot Size: 30

View Photos

View Videos

2000 Toshiba EC65V21-1.5B

Tie Bar Spacing 13.8" x 13.8", Platen Size 21.2" x 21.2", Daylight 5.9"-26", Equipped With V21 Controls , Video Available

$39,500.00

Ref No: 6000221

Tonnage: 65.0

Shot Size: 2.9

Page 1 of 1

6 Machines Available

Find the Right Piece of Equipment for the Plastic Injection Molding You Need

At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.

We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.

If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years of combined experience in the business, you can trust the quality of the machines and services K.D. Capital provides.