Used Plastic Injection Molding Machines - Buy Plastic Machines| KDCapital

Machines in the Plastic Injection Molding Category

Page 1 of 1

9 Machines Available

View Photos

1995 Van Dorn 700 HP

Platen Size 53.5" x 53.5", Distance Between Tie Bars 36.5" x 36.5", Clamp Stroke-Max 44", Ejector Stroke 6", Max Open Daylight 72.75"
Machine Weight (Apprx) 84,500 lb, Machine Dimensions (L x W x H) 36.7' x 7.4' x 10', Voltage 575 Volt, Equipped With Pathfinder 2500 Control, HKO, CP, Under Power Western Canada

$29,500.00

Ref No: 6019004

Tonnage: 700.0

Shot Size: 165

View Photos

1994 Van Dorn 500HT-60F

Tie Bar Spacing 32.5" x 32.5", Platen Size 47.8" x 47.8", Max Daylight 59", Clamp Stroke 30", Min Mold Thickness 10"
Equipped With EL Pathfinder Control, HKO, CP

$29,500.00

Ref No: 786145

Tonnage: 500.0

Shot Size: 60

View Photos

View Videos

1995 Van Dorn 500HT-60

Tonnage 500, Shot Size 60 oz, Platen Size 48" x 48", Tie Bar Spacing 32.5" x 32.5", Max Die Opening 60", Min Die Opening 10", Dual Core Pull , Pathfinder 2500, Hydraulic Knockout, Robot Interface

$27,500.00

Ref No: 786553

Tonnage: 500.0

Shot Size: 60

View Photos

1995 Van Dorn 300HT-30F

Platen Size 37" x 37", Distance Between Tie Bars 25" x 25", Stroke 24", Maximum Open Height 49", Minimum/Maximum Mold Thickness 8"/25", Daylight Minimum/Maximum 8"/49", HP 50, Dimensions 25' x 5'2" x 8'2", Equipped With Pathfinder 2500 Control, CP, RI

$24,500.00

Ref No: 5999394

Tonnage: 300.0

Shot Size: 30

View Photos

1994 Van Dorn 300-RS-30HT

Platen Size 37" x 37", Distance Between Tie Bars 25" x 25", Tie Rod Diameter 4.25", Maximum Open Daylight 49", Min/Max Mold, Thickness 24", 50 HP, Dimensions 25' x 5'2" x 8'2", Equipped With EL Control, HKO, CP

$9,500.00

Ref No: 6000411

Tonnage: 300.0

Shot Size: 30

View Photos

1995 Van Dorn 300-HT-3.7F HPI

Distance Between Tie Bars 25" x 25", Platens 37" x 37", Max Daylight 49", Horsepower 50 HP, Voltage 460 Volt, Dimensions 25' x 5'2" x 8'2",

$22,500.00

Ref No: 6018922

Tonnage: 300.0

Shot Size: 14

View Photos

1995 Van Dorn 300 HT

Distance Between Tie Bars 25" x 25", Platen Size 37" x 37", Max Daylight 49", Voltage 230 Volt, Weight 28,200 lbs, Dimensions 23' x 5'2" x 7'8", 50 HP, Dimensions 25' x 5'2" x 8'2", Equipped With: Pathfiner 2500 Control, HKO, CP, RI, Yushin Hop III sprue

$19,500.00

Ref No: 6000616

Tonnage: 300.0

Shot Size: 20

View Photos

1992 Van Dorn 120-RS-8-FHT

Distance Between Tie Bars 17" x 17", Platen 25" x 25", Injection Pressure 20,000 PSI, Max Open Daylight 30", Injection Stroke 7.62", Ejector Stroke 3", Motor 20HP, Equipped With: EL Control, Core Pull

$9,500.00

Ref No: 6000613

Tonnage: 120.0

Shot Size: 8

View Photos

1995 Van Dorn 1000 HP 125

Distance Between Tie Bars 44" x 44", Platen Size 65" x 65", Open Daylight Max 92", Clamp Stroke Max 50", Equipped With EL Control, HKO, CP, UNDER POWER IN CALIFORNIA, Video Available

$39,500.00

Ref No: 5999309

Tonnage: 1000.0

Shot Size: 125

Page 1 of 1

9 Machines Available

Find the Right Piece of Equipment for the Plastic Injection Molding You Need

At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.

We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.

If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years of combined experience in the business, you can trust the quality of the machines and services K.D. Capital provides.