Tie Bar Spacing 72.83" x 55.12", Platen Size 105.90" x 88.90", Daylight 137.90", Equipped With: , Dual Core Pull, 2 Platen, Retractable Tie Bar Option, Valve Gate-Mold Master, Valve Gate-Control , Robot Interface, Robot Included: Engel Model EC 23-53 RC 100 Hybrid
$199,500.00
Ref No: 786068
Tonnage: 2000.0
Shot Size: 549
2006 Demag Titan 1500
Tonnage 1500 Tons, Shot Size 187 oz, Max. Open Daylight 108.66", Platen Size 83.07" x 73.42", Distance Between Rods 61.00" x 50.39", Mold Thickness Min / Max 25319" x 60.62", Equipped With NC4 Control, HKO, CP, RI, AEC Robot Included
$399,000.00
Ref No: 786051
Tonnage: 1500.0
Shot Size: 187
1997 Engel ES1000/120
Distance Between Tie Bars 40.25" x 44.25", Platens 63.78" x 60.04", Daylight Min/Max 15.75"/78.74", Clamp Toggle, Dimensions 533" L x 130" W x 108" H, Weight 52,800 Lbs, Voltage 460, Equipped With CC100 Control , Dual CP , Six Air Blast Circuits
$175,000.00
Ref No: 785784
Tonnage: 1000.0
Shot Size: 205
1998 UBE 1000/185
Platen Size 66.9" x 66.9", Tie Bar Spacing 50" x 50", Daylight 102.35, Clamp Type Toggle, Equipped With Allen Bradley Control, CP, SPI, Robot Interface
$139,500.00
Ref No: 785545
Tonnage: 1000.0
Shot Size: 140
1998 Van Dorn 1000 HP 125
Distance Between Tie Bars 44" x 44", Platen Size 65" x 65", Open Daylight Max 74", Clamp Stroke Max 50", Equipped With Pathfinder 3000 Control, HKO, CP. RI . 1999 Whittman Robot Model W440 $12,500.00 . Under Power in Kentucky
$79,500.00
Ref No: 785786
Tonnage: 1000.0
Shot Size: 125
1995 Van Dorn 1000 HP 165F-ELP
Platen 73" x 65", Tie Bar Distance 52" x 44", Clamp Style Hydraulic, Daylight Min/Max 12"/74", Ejectror Stroke 8", Motors (2) @ 100 HP, Pathfinder 2500 Control, Wide Platen, CP, Motion no Motion, Robot Interface, Mold Ejector
$69,500.00
Ref No: 745808
Tonnage: 1000.0
Shot Size: 165
2000 Toshiba ISG950-59AT
Tie Bar Spacing 41.7 "x 41.7", Platen Size 60.2" x 60.2", Min/Max Daylight 19.7"/88.5", Clamp Stroke 69", Ejector Stroke 7.9", Equipped With Injectvisor V10 Control, CP, Dual Air Blow, Motion no Motion, RS232 Port, Mold Ejector Plate Monitor, Mold Valve Gate, Motion no Motion
Air Blow, Yushin NVXII-800SL Mfg in 2000 Availabe for an additional cost
$150,000.00
Ref No: 785543
Tonnage: 950.0
Shot Size: 104
1995 Toshiba ISGT950
Tonnage 950 Tons, Shot Size 186 oz, Platen Size 60.2", Clamp Stroke 69", Tie bar 41.7", Open Daylight 19.7", Close Daylight, Equipped With V10 Control , RI, CP, HKO
$96,500.00
Ref No: 786052
Tonnage: 950.0
Shot Size: 186
2002/03 Nissei FV9200-600LNI
Distance Between Tie Bars 52.4" x 52.4", Platen Size 70.9" x 70.9", Equipped With NC930T Control, CP, 3 Air Blast, SPI Interface w/Connector, 2002 $220,000.00, 2003 $230,000.00
$230,000.00
Ref No: 785768
Tonnage: 945.0
Shot Size: 200
2003 Negri-Bossi V850-6500
Capacity 850 Ton, Shot Size 125.93 oz, Between Platen 44.8" x 40.2", Platen Size 65.7" x 62.2", Stroke 47.2", Equipped With Dimi El 2 Plu, CNC Control, HKO, CP, RI
$119,500.00
Ref No: 786118
Tonnage: 935.0
Shot Size: 125.93
1992 Nissei PH-860S420B
Tie Bar Spacing 42.55" x 42.55", Platen 65.01" x 65.01", Clamp Stroke 68.9", Daylight Min/Max 19.7"/88.65", Equipped With NC9000S Contol, HKO, CP, RI
$59,500.00
Ref No: 785651
Tonnage: 850.0
Shot Size: 185
1994 Husky Tandem TX750 RS 120/100
Tie Bar Spacing 44.1" x 44.1", Platen Size 60.1" x 60.1", Clamp Stroke 58.1", Siemens 115 Control, HKO, CP, Quick mold Change System, Only Ran PolyPro, 5,348 Hours, Wired For 480/3/60
$69,500.00
Ref No: 746241
Tonnage: 825.0
Shot Size: 160
1998 Nissei FV-9100
Tie Bar Spacing 43.3" x 43.3", Screw Diameter 3.94", Stroke 37.4", Daylight Max. 75.2", Min. 17.75"
$135,000.00
Ref No: 785851
Tonnage: 720.0
Shot Size: 132
1990 Van Dorn 700-RS-125 ECVLD
Distance Between Tie Bars 45" x 36.5", Min/Max Daylight 16"/75.75", Ejector Stroke 6", Equipped With CRT B Control , HKO, CP
$22,500.00
Ref No: 785792
Tonnage: 700.0
Shot Size: 125
2002 Husky G600GEN-RS120/100
Tie Bar Spacing 40.1" x 40.1", Platen Size 56.1" x 57.2", Clamp Stroke 38.3", Max Daylight 75.7", Min/Max Mold Height 9.8/37.4"
Ejector Stroke 5.9", Motor 200 HP, Equipped With GE Fanuc Control, CP, Air Eject, Hydraulic Shut Off Nozzle, Safety Drop Bar
$125,000.00
Ref No: 785570
Tonnage: 660.0
Shot Size: 130
1993 Toshiba ISF610-59
Tie Bar Spacing 33.8" x 33.8", Platens 48.4" x 48.4", Ejector Tonnage 16, Ejector Stroke 6.3", Clamp Hydraulic, Clamp Stroke 47", Daylight Max 63", Daylight Min 15.8", Weight 59000 Lbs, Length 398", Width 71", Height 87", Equipped With: Injectvisor VL Control
HKO, CP, Air Blow, UNDER POWER, 480 Volt
$39,500.00
Ref No: 785110
Tonnage: 610.0
Shot Size: 102
1996 Engel ES-2000/500
Max Clamp Stroke 27.56", Min / Max Mold Height 11.813" / 37.87", Tie Bar Spacing 34.64", Platen Size 48.81" x 47.24", Equipped With:
CC-100 A02 Control, Air Blow, Core Pull, Extended Tie Bars, SPI Robot Interface
$59,500.00
Ref No: 785554
Tonnage: 500.0
Shot Size: 50.6
1997 Engel ES-2000/500
Max Clamp Stroke 27.5", Min / Max Mold Height 11.81" / 37.87", Tie Bar Spacing 34.64" x 33", Platen Size 49.3" x 62.67", Equipped With:
CC-100 Control, Robot Interface, Accumulator Package, High Speed (40" Per sec), Extended Tie Bar (Option), Dual Core Pull, Quick Mold , Mounts, Extra Heat Option, Additional Outlets: 460 V / 3PH / 60 Amp
$62,500.00
Ref No: 785551
Tonnage: 500.0
Shot Size: 50.6
1997 Engel ES-2000/500
Max Clamp Stroke 27.56", Min / Max Mold Height 11.81" / 33.93", Tie Bar Spacing 34.6", Platen Size 48.81" x 47.24", Equipped With:
CC-100 Control, High Speed Option (40" Per Sec), Accumulator Package, Air Blow, Dual Core Pull, Pnuematic Mold Gate Option, SPI Robot Interface, Host Interface, Additional Outlets: 460 V / 3PH / 60 Amp
$62,500.00
Ref No: 785552
Tonnage: 500.0
Shot Size: 50.6
1992 Toshiba ISF500-SII-34B
Capacity 500 Ton, Shot Size 77oz, Tie Bar Spacing 31.8" x 31.8", Platen Size 45.7" x 45.7", Maximum Daylight 55.1", Clamp Stroke 39", Equipped With Injectvisor SII Control, HKO, CP, Motion-No-Motion
Find the Right Piece of Equipment for the Plastic Injection Molding You Need
At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.
We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.
If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years in the business, you can trust the quality of the machines and services K.D. Capital provides.
