Tie Bar Spacing 28.9" x 28.9", Platen Size 39.4" x 39.4", Clamp Type Toggle, Clamp Stroke 25.6", Daylight Min / Max 9.84" / 53.15", Mold Height Min / Max 9.84" / 27.56", Equipped With: Camac 486C Control, HKO, RI, Dimensions: 349" x 71.1" x 96.1" H, Weight: 38,800 LBS -
Price: $59,500.00 each
$59,500.00
Ref No: 785074
Tonnage: 440.0
Shot Size: 54
1992 Cincinnati VT440-54
Platen Size 39.4" X 39.4", Distance Between Tie Bars 28.9" X 28.9", Min/Max Mold Height 9.84"/27.56", Daylight Max 39.5", Electrics 480 Volt, Dimensions 349" X 71" X 96", Weight 38,800 Lbs, Equipped With CAMAC VEL Control, HKO, CP
$27,500.00
Ref No: 785680
Tonnage: 440.0
Shot Size: 54
1996 Engel ES-2000/400
Platen Size 43.78" x 43.39", Max Clamp Stroke 27.56", Clamp Type Toggle, Min / Max Mold Height 11.813" / 61.50", Stroke 27.56", Voltage 460/30/60, Dimensions 359" x 87" x 101", Weight 52,000 Lbs, Equipped With: CC 100 EL A03 Control, Quick Mold Change, Air Blow, CP
Ceramic Heater Bands, $64,950.00 Each
$49,500.00
Ref No: 785714
Tonnage: 400.0
Shot Size: 38.7
1997 HPM T400-48
Platen Size 43" x 43", Tie Bar Space 28" x 28", Max Daylight 52.4", Max Daylight Closed 27", Ejector Stroke 6", Volt 460 Volt
Command 4500 Controller, HKO, Ceramic Heater Bands, 2 Station CP
$17,500.00
Ref No: 746108
Tonnage: 400.0
Shot Size: 48
1999 Nissei ES7000-100
Tie Bar Spacing 28.9" x 28.9", Platen Dimensions 41.5" x 41.5", Clamp Stroke 25.6", Min/Max Mold Height 13.8"-26.4", Max Daylight 52", Equipped With NC9300T Control, Two machines availalbe $89,500.00 each
$89,500.00
Ref No: 767262
Tonnage: 398.0
Shot Size: 24.6
2003 Nissei ES7000-100
Tie Bar Spacing 28.9" x 28.9", Platen Dimensions 41.5" x 41.5", Clamp Stroke 25.6", Min/Max Mold Height 13.8"-26.4", Max Daylight 52"
Equipped With NC9300T Control, HKO, RI, Sailor Robot $7,500.00
$89,500.00
Ref No: 785619
Tonnage: 398.0
Shot Size: 26
2004 Nissei NEX 7000 100LE
Tie Bar Spacing 28.9" x 28.9", Platen Dimensions 41.5" x 41.5", Clamp Stroke 25.6", Min/Max Mold Height 13.8"-26.4", Max Daylight 52"
Equipped With TACT Control, CP, RI, Auto Lube, Star Robot Model NPWS 1200 $10,000.00, $115,000.00 each
$115,000.00
Ref No: 785574
Tonnage: 398.0
Shot Size: 26
1998 Cincinnati Ferromatik K350S
Distance Between Tie Bars 38.19" x 38.19", Platen Size 47.24" x 47.24", Mold Opening Stroke 33.46", Mold Installation Height 13.78", Daylight Max 47.24", Equipped With Ferromatik Control, High Speed, RI, Air Eject, Extended Tie Bars
$49,500.00
Ref No: 785398
Tonnage: 385.0
Shot Size: 31
1999 JSW J385ELII
Between Tie Bars 28.47" x 28.47", Platen Dimensions 42.32" x 41.93", Max Opening Stroke 23.40", Min/Max Mold Height 11.70"/26.13", Equipped With Syscom 1000 Controller
$62,500.00
Ref No: 785713
Tonnage: 385.0
Shot Size: 17.8
2002 Sumitomo SH350C
Tie Bar Spacing 29.9 x 27.9, Platen Size 42.1 x 40.1, Daylight Max 53.9, Min Max Mold Height 12.6-26.4, Clamp Stroke 27.5, Voltage 460, Dimensions 296" x 75.2" x 89.8", Weight 11.5 Metric Tons, Equipped With N7 Control, Hydraulic CP, RI
Eject During Mold Open, External Memory Card Interface
$69,000.00
Ref No: 785578
Tonnage: 385.0
Shot Size: 48.5
2007 Cincinnati S2000i
Platen Size 40.6" x 40.6", Tie Bar Spacing 28" x 28", Max Daylight 48.21", Max/Min Mold Height 25.6"/11.8", Max Clamp Stroke 23.62",
Ejector stroke 5.91", Equipped With GE Fanuc Control, CP Unit, 1247 Hours
$209,500.00
Ref No: 785577
Tonnage: 330.0
Shot Size: 30
2002 Nissei FN6000-71A
Tie Bar Spacing 26 "x 26", Platen Size 37.6" x 37.6", Daylight Max 45.3, Min Mold Height 12.6, Clamp Stroke 32.7, Voltage 460
Dimensions 262.6" x 63" x 81.5", Weight 24,030, Equipped With NC9300T Control, Hydraulic CP, RI
$74,500.00
Ref No: 785588
Tonnage: 309.0
Shot Size: 29.9
1998 Cincinnati Ferromatik K275S
Distance Between Tie Bars 24.80" x 24.80", Platen Size 38.19" x 38.19", Mold Openign Stroke 33.46", Mold Installation Height 13.78", Daylight Max 47.24", Equipped With Ferromatik Control
$39,500.00
Ref No: 785400
Tonnage: 302.0
Shot Size: 31
2001 Arburg 630S-2500-1300
Distance Between Tie Bars 24.8" x 24.8", Platen Size 35.43" x 35.43", Clamping Stroke 23.62", Min Mold Height 11.81"
Max Daylight 35.43"-51.18", Equipped With Selogica Microprocessor , Control, RI, Air Blow, Six Additional Heat Zones, Vacuum Receiver, CP, HKO
$74,500.00
Ref No: 784870
Tonnage: 300.0
Shot Size: 29
1993 Cincinnati VT300-29
Tie Bar Spacing 25.2" x 24.6", Platens 36.8" x 36.2", Clamp Toggle, Clamp Stroke 22.8", Daylight Max 48", Daylight Min 7.9", Max Mold HT 25.2", Min Mold HT 7.9", Equipped With: Camac VEL Control, HKO
$17,500.00
Ref No: 785679
Tonnage: 300.0
Shot Size: 29
2005 Engel TG2000/300 PKGC100
Platen Size 35.67" x 35.67", Tie Bar Spacing 25.04" x 25.04", Clamp Sroke 23.62", Mold Thickness 7.87"-25.98", Equipped With CC100 Control, HKO, High Speed Machine, *********ONLY 1,330 HOURS**********
$139,500.00
Ref No: 785684
Tonnage: 300.0
Shot Size: 38.7
2004 Engel TL-1800/300
Platen Size 46.6" x 35", Clamp Type Hydraulic, Equipped With CC100 Control, Dual CP, Motion no Motion
$115,000.00
Ref No: 785683
Tonnage: 300.0
Shot Size: 34.5
1997 Toyo TM-300H
Tie Bar Spacing 28.74" x 28.74", Platen Size 37" x 37", Clamp Stroke 22.8", Min/Max Mold Height 9.84"/25.6", Voltage 480, Weight 28,600, Equipped With PLCS-9 Control, CP
$45,500.00
Ref No: 785238
Tonnage: 300.0
Shot Size: 25.5
2004 Toyo TM-300H2
Platen Size 37" x 37", Tie Bar Spacing 28.74" x 28.74", Clamp Stroke 22.8", Max Daylight 48.4", Min/Max Mold Height 9.84"/25.6"
Weight 28,600, Voltage 480, Equipped With PLCS-11 Control
$95,500.00
Ref No: 785240
Tonnage: 300.0
Shot Size: 32.8
01/00 Toyo TM300H
Distance Between Tie Bars 28.74" x 28.74", Platen Size 37" x 37", Clamping Stroke 22.83", Mold Height (Min/Max) 9.84"/25.60", Ejector , troke 5.51", Electrics 460 Volt, PLCS-9 Control , Air Blow, HKO, CP, 2001 $74,500.00, 2000 $72,500.00
Find the Right Piece of Equipment for the Plastic Injection Molding You Need
At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.
We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.
If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years in the business, you can trust the quality of the machines and services K.D. Capital provides.
