Platen Size 27.56" x 27.36", Distance Between Tie Bars 18.11" x 18.11", Max Clamp Stroke 18.11", Min/Max Mold Height 5.91" / 40.16", Equipped With: CC90 Control, Auto Lube, Quick Change Mold Spigots, Robot: SR35 Model ERC23/1-S SN: 8129 / 023 / 96, (4) Two Way Air Valves, Swivel, Grip 1, Cylinder 1, Sprue, (2) Vacuum Circuits
$26,500.00
Ref No: 784702
Tonnage: 200.0
Shot Size: 8
1995 Engel Thermoset Machine
Platen 30.71" x 27.36", Tie Bars 21.26" x 18.11", Clamp Stroke 18.11", Min/Max Mold Height 5.91"/22.05", Max Daylight 40.16", Stroke 5.91", CC 90 Control, HKO, CP, RI
$29,500.00
Ref No: 663852
Tonnage: 200.0
Shot Size: 18
2006 Engel VC750/200
Platens 35.43" x 29.53", Clamp Stroke 27.56", Daylight 37.4", Clamp Type Hydraulic tiebarless, Voltage 460 Volts, Equipped With EC 100 Control, Sprue Picker, Spare complete 30 mm S1 screw & M1 barrel, 50 mm S8 upgraded screw (thru-hardened) and M3 (Xaloy 102 equivalent barrel), Ceramic heater bands, SPI robot interface, Printer receptacle, Air blow, (1) Pneumatic valve gate control, EP Picker
Dimensions 229" x 73" x 89", Weight 25,350 Lbs, ***LESS THAN 1,000 HOURS***
$99,950.00
Ref No: 785848
Tonnage: 200.0
Shot Size: 12.7
2004 Newbury Vertical
Max Mold Space 22" x 18", Max Mold Height 24", Max Daylight 35", Stroke 11", Screw L/D 20:1, Equipped With, Van Dorn Pathfinder 3000 Control, 48" Rotary Table, Dual CP, Hydraulic Eject, Adjustable Nozzle Height, Sprue Break , Two (2) Machine Availalbe $99,500.00
$99,500.00
Ref No: 785283
Tonnage: 200.0
Shot Size: 21
1997 Nissei FN4000
Tie Bar Spacing 20.9" x 20.9", Platen Size 30.3" x 30.3", Clamp Stroke 27.6", Daylight Max 37.4", Min Mold Height 9.8", Ejector Stroke 4.3", Equipped With NC9000 Control, HKO, CP, Air Blow
$34,500.00
Ref No: 784912
Tonnage: 200.0
Shot Size: 14.8
1995 Toyo TM-200G2
Platen Size 30.7" x 30.7", Tie Bar Spacing 22.05" x 22.05", Max Daylight 40.1", Clamp Stroke 18.5", Min Mold Height 19.8", Max Mold Height 19.69"19.8", Weight 15,500 lbs, Voltage 480, Equipped With PLCS-6 Control, CP
$27,500.00
Ref No: 785233
Tonnage: 200.0
Shot Size: 11.1
1999 Arburg 520C-2600-675
Platen Size 28.15" x 28.15", Tie Bar Spacing 20.47" x 20.47", Min Mold Height 9.84", Max Daylight 37.4", Equipped With Selogica Controls, Air Blow , Printer and Coloring Interface, **This machine has vertical injection capabilities but
adapters would need to be purchased from Arburg, Operating Hours 21,574
$34,500.00
Ref No: 784888
Tonnage: 220.0
Shot Size: 12.7
2005 Cincinnati Powerline
Platen Size 32.8" x 32.8", Tie Bar Spacing 23.62" x 23.62", Max Daylight 39.37", Max/Min Mold Height 19.7"/5.9", Max Clamp Stroke 19.7", Ejector Stroke 5.9", Voltage 230 Volts, Machine Dimensions 256.5" x 65.9" x 86.1", Machine Weight 26,500 lbs, Equipped With Xtreem ST Control, Loaded With Options, !!!!!ONLY 600 HOURS!!!!!
$147,500.00
Ref No: 785059
Tonnage: 220.0
Shot Size: 8
1992 Cincinnati VT220-20
Tie Bar Spacing 21.3" x 19.3", Platen 30.9" x 30.1", Clamp Stroke 19.1", Daylight Max/Min 38.7"/6", Ejection Stroke 9.8", Ejector Tonnage , 6.1, Inj Stroke 9.8", Inj Pressure 27,512 PSI, Motor HP 40, Voltage 460, Equipped With VEL Control , HKO , CP
$16,500.00
Ref No: 785699
Tonnage: 220.0
Shot Size: 20
1995 Goldstar IDE220EN-19
Tie Bar Spacing 21.3" x 21.3", Platen 31.1" x 31.1", Min/Max Daylight 9.4"/39.3", Motor HP 50, Inj Pressure 18,560 PSI, Screw Dia 2.17", Weight 17,636 Lbs, Dimensions (L) 18.5' x (W) 4.8' (H) 7.2', Hicom 200 Control, HKO, CP
$12,500.00
Ref No: 746331
Tonnage: 220.0
Shot Size: 19
2005 Demag Van Dorn HT 230/560-1220
Distance Between Tie Bars 22" x 22", Platen Size 32" x 32", Ejector Stroke 4.5, Daylight Max 42", Mold Thickness-Min 7", Weight 21,300 lbs, Dimensions (l x w x h) 23' x 5' x 6'6", Equipped With Pathfinder 5000 Control, RI, CP, !!!!ONLY 11,000 HOURS!!!!
$92,500.00
Ref No: 785722
Tonnage: 230.0
Shot Size: 25
1993 Van Dorn 230HT8
Platen 32" x 32", Tie Bar Spacing 22" x 22", Clamp Stroke 20", Daylight Max 42", Weight 20,100 lbs, Dimensions L 22.3" x W 4.7", Equipped With Pathfinder 3000, HKO, RI Two Machines available $24,500.00 each
$24,500.00
Ref No: 785499
Tonnage: 230.0
Shot Size: 8
1997 Nissei FN5000-71A
Tie Bar Spacing 23.2" x 23.2", Platen Size 33.5" x 33.5", Clamp Stroke 29.9", Daylight Max 41.3", Min Mold Height 11.4", Ejector Stroke 4.7" Equipped With NC9000 Control, HKO, CP, Air Blow , Two Machines Available $39,500.00 each
$39,500.00
Ref No: 784874
Tonnage: 239.0
Shot Size: 23.5
1997 Toyo TM-245H-17
Tie Bar Spacing 24.02" x 24.02", Platen 32.28" x 32.28", Clamp Toggle, Clamp Stroke 20.47", Motor HP 40, Min/Max Mold Height 9.84"/25.59", Dimensions (L x W x H) 233.6" x 54.6" x 82.1", Weight 10.5 Tons, Equipped With PLCS9 Control, HKO, Hydraulic CP
$39,500.00
Ref No: 785599
Tonnage: 242.0
Shot Size: 17.5
2000 Sumitomo SH2200C
Tie Bar Spacing 24 x 22, Platen Size 35 x 33, Daylight Max 42.9, Min Max Mold Height 9.8-22.8, Clamp Stroke 20.07, Voltage 460, Dimensions 225" x 65.7" x 89.8", Weight 8.1 Meric Ton, Equipped With N7 Control, Hydraulic CP, Eject During Mold Open, External Memory Card Interface
$34,500.00
Ref No: 785579
Tonnage: 243.0
Shot Size: 23.8
2000 JSW J245ET
Distance Between Tie Rods 22.83" x 22.83", Mold Thickness 9.06-19.69", Daylight Opening 41.34", Equipped With Syscom 1000 Control, HKO
$50,000.00
Ref No: 785712
Tonnage: 245.0
Shot Size: 17.8
2006 Toshiba ISG250V21-10
Platen Size 34.2" x 32.2", Tie Bar Spacing 24" x 22", Clamp Stroke 31.5", Min/Max Daylight 10.2"/41.7", Ejector Stroke 5.1", Equipped With: Injectvisor V21 Control, HKO, CP, Dual Air Blow , Motion no Motion
$96,000.00
Ref No: 785973
Tonnage: 250.0
Shot Size: 16
1998 Sumitomo SG260M C1250L
Distance Between Tie Bars 22.04718" x 22.04718", Overall Size of Platen 33.07077" x 33.07077", Opening Stroke 8.464541"~22.24403", Mold Space 8.267692"~20.07868", Dry Cycle Time 1.8 sec, Machine Dimensions 277.2" x 64.4" x 89.5", Machine Weight 22,000 Lbs, Equipped With NIV Control, HKO , CP, (4) Four Machines Available $22,500.00 Each
$22,500.00
Ref No: 785420
Tonnage: 260.0
Shot Size: 23.8
1997 Cincinnati Ferromatik K250S
Distance Between Tie Bars 24.80" x 24.80", Platen Size 38.19" x 38.19", Mold Opening Stroke 33.46", Mold Installation Height 13.78", Daylight Max 47.24", Equipped With Feromatik Control, Two (2) Machines Available $24,500.00 Each
$24,500.00
Ref No: 785399
Tonnage: 275.0
Shot Size: 31
2001 Arburg 630S-2500-1300
Distance Between Tie Bars 24.8" x 24.8", Platen Size 35.43" x 35.43", Clamping Stroke 23.62", Min Mold Height 11.81"
Max Daylight 35.43"-51.18", Equipped With Selogica Microprocessor , Control, RI, Air Blow, Six Additional Heat Zones, Vacuum Receiver, CP, HKO
Find the Right Piece of Equipment for the Plastic Injection Molding You Need
At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.
We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.
If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years in the business, you can trust the quality of the machines and services K.D. Capital provides.
