Tie Bar Spacing 44.1" x 44.1", Platen Size 60.1" x 60.1", Clamp Stroke 58.1", Siemens 115 Control, HKO, CP, Quick mold Change System, Only Ran PolyPro, 5,348 Hours, Wired For 480/3/60
$69,500.00
Ref No: 746241
Tonnage: 825.0
Shot Size: 160
1992 Nissei PH-860S420B
Tie Bar Spacing 42.55" x 42.55", Platen 65.01" x 65.01", Clamp Stroke 68.9", Daylight Min/Max 19.7"/88.65", Equipped With NC9000S Contol, HKO, CP, RI
$59,500.00
Ref No: 785651
Tonnage: 850.0
Shot Size: 185
2002/03 Nissei FV9200-600LNI
Distance Between Tie Bars 52.4" x 52.4", Platen Size 70.9" x 70.9", Equipped With NC930T Control, CP, 3 Air Blast, SPI Interface w/Connector, 2002 $220,000.00, 2003 $230,000.00
$230,000.00
Ref No: 785768
Tonnage: 945.0
Shot Size: 200
2000 Toshiba ISG950-59AT
Tie Bar Spacing 41.7 "x 41.7", Platen Size 60.2" x 60.2", Min/Max Daylight 19.7"/88.5", Clamp Stroke 69", Ejector Stroke 7.9", Equipped With Injectvisor V10 Control, CP, Dual Air Blow, Motion no Motion, RS232 Port, Mold Ejector Plate Monitor, Mold Valve Gate, Motion no Motion
Air Blow, Yushin NVXII-800SL Mfg in 2000 Availabe for an additional cost
$150,000.00
Ref No: 785543
Tonnage: 950.0
Shot Size: 104
1997 Engel ES1000/120
Distance Between Tie Bars 40.25" x 44.25", Platens 63.78" x 60.04", Daylight Min/Max 15.75"/78.74", Clamp Toggle, Dimensions 533" L x 130" W x 108" H, Weight 52,800 Lbs, Voltage 460, Equipped With CC100 Control , Dual CP , Six Air Blast Circuits
$175,000.00
Ref No: 785784
Tonnage: 1000.0
Shot Size: 205
1998 UBE 1000/185
Platen Size 66.9" x 66.9", Tie Bar Spacing 50" x 50", Daylight 102.35, Clamp Type Toggle, Equipped With Allen Bradley Control, CP, SPI, Robot Interface
$139,500.00
Ref No: 785545
Tonnage: 1000.0
Shot Size: 140
1998 Van Dorn 1000 HP 125
Distance Between Tie Bars 44" x 44", Platen Size 65" x 65", Open Daylight Max 74", Clamp Stroke Max 50", Equipped With Pathfinder 3000 Control, HKO, CP. RI . 1999 Whittman Robot Model W440 $12,500.00 . Under Power in Kentucky
Price On Request
Ref No: 785786
Tonnage: 1000.0
Shot Size: 125
1995 Van Dorn 1000 HP 165F-ELP
Platen 73" x 65", Tie Bar Distance 52" x 44", Clamp Style Hydraulic, Daylight Min/Max 12"/74", Ejectror Stroke 8", Motors (2) @ 100 HP, Pathfinder 2500 Control, Wide Platen, CP, Motion no Motion, Robot Interface, Mold Ejector
$69,500.00
Ref No: 745808
Tonnage: 1000.0
Shot Size: 165
1998 Van Dorn HP
Tie Bar Spacing 52" x 44", Platen Size 73" x 65", Daylight 92" w/o Spacers, Clamp Stroke 74", Mold Thickness 24", Equipped With Pathfinder 5000 Control, 4 Sequence CP Retractable Tie Bar, Wittmann Robot available at an additional cost
$115,000.00
Ref No: 785911
Tonnage: 1000.0
Shot Size: 260
2002 Van Dorn Caliber
Platen Size 109.1" X 93.7", Tie Bar Spacing 72.8" X 57.5", Daylight Maximum 137.8", Clamp Stroke 108.3", Min./Max. Mold Thickness 29.5"/68.9", Ejector Stroke 15.7", Equipped With: Pathfinder 5000 Control , Dual C.P., R.I., Feed Throat Cooling,Power Capicitor
$225,000.00
Ref No: 785685
Tonnage: 1760.0
Shot Size: 260
1996 Van Dorn 2000 HP
Distance Between Tie Bars 52" x 52", Platen 80" x 80", Max Daylight 158.75", Min/Max Mold Height 133"/30", Equipped With 2500 Control , CP (On the Fly) 6 Stage Air Eject , High Speed Injection, Mold Gate, Dimensions 50' 6" L x 10' W x 13'6" Weight 299,000 lbs, Clamp 138" L x 140" W x 13'2" H Weight 240,000 lbs
Find the Right Piece of Equipment for the Plastic Injection Molding You Need
At K.D. Capital, we carry a variety of tools and equipment that your company needs to run successfully. One of the many pieces of equipment we offer is the plastic injection molding machine. We have a good selection of different years and manufacturers, and all the machinery we carry is in top condition.
We make your search for an injection molding machine as simple as possible by providing you with several different ways to conduct your search. By clicking on any of the links listed on this page, you can quickly see the different injection molding machines by year, make, price, model, shot size or ton. We carry some of the most trusted names in the business, so you can be sure the machine you receive from us will provide you with the performance you need.
If you have any questions about the different plastic injection molding machines we sell, you call 800-922-1674 if you're in the United States or 480-922-1674 if you're calling internationally. You can also email us at customerservice@kdcapital.com. If you don't see the exact product you're looking for, just fill out the form on our "If we don't have it, we'll find it page." We'll conduct an extensive search to look for the precise injection molding machine you want and will let you know the different options available. With over 100 years in the business, you can trust the quality of the machines and services K.D. Capital provides.