Activate Pricing

Need to see our prices?

Please click on the "Activate Pricing" button below.
You'll be asked to fill out a short form, then we'll send you an email.
Click on the email verification link.
This will take you back to our main screen, where pricing will be activated.

An Important Note:

Some machinery may show as "Call for Price" due to our customer's request of confidentiality.
Please give us a call, and we'll answer your pricing questions.
You can also fill out our "Inquiry Request" on email, and you'll hear from us shortly.

Already activated and prices not showing?

You may be using a different device or browser than the one you originally activated. Just re-enter your email on the "re-verify" link, and you'll see our pricing.

If you have any other questions, please give us a call, send an email, or click on live chat.
We're here to help.

Activate Pricing
In the USA: 1 (800) 922-1674
International: 1 (480) 922-1674
Live Chat:
The Industries Most Trusted Source to Buy and Sell Used CNC, Plastics, and Sheet Metal Fabrication Machinery.

Machines in the CNC Boring Mills Category

Filter by Make
Re-Sort Results By

Page 1 of 1
5 Machines Available
2000 Giddings & Lewis 180 VTC

 138" Table Diameter, 180" Max Swing, 93.25" Max Height Under Cross Rail, 74.8" RAM Vertical Travel, 10.62" x 10.62" RAM Cross Section, 52" Rail Vertical Travel, #60 ANSII Taper, Giddings & Lewis 8002L CNC Control, 138" T-Slotted Table w/ Face Plate Jaws, Coolant Thru Center of Ram, Chip Conveyor

Click for Price
Ref No: 7788451
1995 Mazak A-12M MegaTurn

 49.21" Table Diameter, 57.08" Swing, 53.15" Turning Diameter, 32.08" x 21.75" x 31.49" Travels, 60 HP, 30 ATC, CAT 50, Mazatrol T32-3 CNC Control, Thru the Tool Coolant, (6) Pallet Shuttle System, Chip Conveyor

Click for Price
Ref No: 7788428
1975 Summit 59" Vertical Boring Mill

59" Vertical Boring Mill Max Swing With Vertical Heads:. 71", Max Swing With Side Heads: 63", Max Machine Height Over Table:. 63", Max Weight of Work Piece: 10 Ton. Table Diameter: 59", Number of Table Speeds: 18, Table Speed Range: 4 ~ 165 RPM, Travel RH Turret Head: 30", Horz. Cross Travel of Heads: 38", Vertical Adj. Side Head Column: 61", Horz. Adj. Side Head on Column: 25", Cross Rail Vert. Adjustment: 55", Main Drive Motor: 50 HP, Present Electrics: 220/440V/3/60, Equipped With The Following:Motors & Electrical Controls Double Ram-Heads (Swivelling-Type), Side Head

Click for Price
Ref No: 7783750
2000 Titan CNC Vertical Turning Lathe

Table Diameter 118.11", Work Piece Max. Diameter 129.92", Max. Work Piece Weight 20 Tons, Max. Work Piece Height 70.07", Table Speeds 1 - 125 RPM, Tools Disk Magazine 12 Positions, Ram Cross Section 9.84"X 9.84", Travel on Cross-Rail X-Axis 78.74", Vertical Ram Travel (Z-axis) 43.89", Cross-Rail Vertical Travel 78.74", Feed Speed on X, Z Axis 1-4,000 mm/min, Rapid Feed on X Axis 12,000 mm/min, Rapid Feed on Z Axis 8,000 mm/min, Linear Positioning Accuracy + 16um, Linear Axes Repeatability + 8um, Main Table Driving Motor 60kW, Equipped With The Following Siemens 840C CNC Controller & 10.5"Colour, Screen & Remote Hand-Wheel Unit, 3.5" Floppy Disk Drive, Part Program Input, Hard Disk W/Min 40MB Program Part Storage, Coolant System, Motors & Controls, Available Manuals

Click for Price
Ref No: 7783752
Toshiba TUE-20

 78.7" Table Diameter, 90.5" Max Swing, 59.05" Max Turning Height, 200 RPM, 60 HP, Fanuc 18 CNC Control, Chip Conveyor, Coolant System

Click for Price
Ref No: 7787606
Page 1 of 1
5 Machines Available