Activate Pricing

Need to see our prices?

Please click on the "Activate Pricing" button below.
You'll be asked to fill out a short form, then we'll send you an email.
Click on the email verification link.
This will take you back to our main screen, where pricing will be activated.

An Important Note:

Some machinery may show as "Call for Price" due to our customer's request of confidentiality.
Please give us a call, and we'll answer your pricing questions.
You can also fill out our "Inquiry Request" on email, and you'll hear from us shortly.

Already activated and prices not showing?

You may be using a different device or browser than the one you originally activated. Just re-enter your email on the "re-verify" link, and you'll see our pricing.

If you have any other questions, please give us a call, send an email, or click on live chat.
We're here to help.

Activate Pricing
 
In the USA: 1 (800) 922-1674
International: 1 (480) 922-1674
Live Chat:
The Industries Most Trusted Source to Buy and Sell Used CNC, Plastics, and Sheet Metal Fabrication Machinery.
   

Machines in the CNC Vertical Turret Lathes Category

Filter by Make
Re-Sort Results By



Re-Sort Results By: Year  |  Make

Page 1 of 1
2 Machines Available
 
2006 Titan 25/33 CNC Vertical Turning Lathe

Table Diameter 98.42", Work Piece Max. Diameter 129.92", Max. Work Piece Weight 30 Tons, Max. Work Piece Height 98.42", Table Speeds 1 - 125 RPM, ATC 12 Positions, Ram Cross Section 9.84" X 9.84", Slide Travel Cross-Rail X-Axis 108.66", Vertical Ram Travel (Z-axis) 59.05", Cross-Rail Vertical Travel 98.42", Feed Speed on X, Z Axis .039-157 IPM, Rapid Feed on X Axis 12,000mm/min, Rapid Feed on Z Axis 8,000mm/min, Linear Axes Pos. Accuracy + 16um, Linear Axes Repeatability + 8um, Main Table Driving Motor 95 HP, Equipped With The Following: Siemens 840D CNC Controller, 4 Jaw Chuck, Coolant System, Motors & Controls, Approximate Dimensions: 296"(LR) X 214"(FB) X 303"(H), Approximate Weight: 112,433 Lbs.

Click for Price
Ref No: 7783753
 
2000 Titan CNC Vertical Turning Lathe

Table Diameter 118.11", Work Piece Max. Diameter 129.92", Max. Work Piece Weight 20 Tons, Max. Work Piece Height 70.07", Table Speeds 1 - 125 RPM, Tools Disk Magazine 12 Positions, Ram Cross Section 9.84"X 9.84", Travel on Cross-Rail X-Axis 78.74", Vertical Ram Travel (Z-axis) 43.89", Cross-Rail Vertical Travel 78.74", Feed Speed on X, Z Axis 1-4,000 mm/min, Rapid Feed on X Axis 12,000 mm/min, Rapid Feed on Z Axis 8,000 mm/min, Linear Positioning Accuracy + 16um, Linear Axes Repeatability + 8um, Main Table Driving Motor 60kW, Equipped With The Following Siemens 840C CNC Controller & 10.5"Colour, Screen & Remote Hand-Wheel Unit, 3.5" Floppy Disk Drive, Part Program Input, Hard Disk W/Min 40MB Program Part Storage, Coolant System, Motors & Controls, Available Manuals

Click for Price
Ref No: 7783752
Page 1 of 1
2 Machines Available