Activate Pricing

Need to see our prices?

Please click on the "Activate Pricing" button below.
You'll be asked to fill out a short form, then we'll send you an email.
Click on the email verification link.
This will take you back to our main screen, where pricing will be activated.

An Important Note:

Some machinery may show as "Call for Price" due to our customer's request of confidentiality.
Please give us a call, and we'll answer your pricing questions.
You can also fill out our "Inquiry Request" on email, and you'll hear from us shortly.

Already activated and prices not showing?

You may be using a different device or browser than the one you originally activated. Just re-enter your email on the "re-verify" link, and you'll see our pricing.

If you have any other questions, please give us a call, send an email, or click on live chat.
We're here to help.

Activate Pricing
 
In the USA: 1 (800) 922-1674
International: 1 (480) 922-1674
Live Chat:
The Industries Most Trusted Source to Buy and Sell Used CNC, Plastics, and Sheet Metal Fabrication Machinery.
   

New Arrivals

New arrival listings will drop off after 15 days
All available machinery may be viewed by using the tabs above.
All available machinery may be viewed by using the navigation.
Filter by Machine Type
Filter by Make
Page 2 of 3
52 Machines Available
 
2013 HK FL3015
5' x 10' Table Size, 5,000 Max Wattage, 11,000 Hours, 460/3/60 Power Requirement, Siemens 840D SINUMERIK Control, Dual Pallet Shuttle Tables, Chiller Unit, Dust Collector
 
Click for Price
Ref No: 8068282
 
2014 Mitsubishi MV2400S
23.6" x 15.7" x 12.3" Travels, 3" x 3" U/V Axis Travel, 15 Degree Taper Cutting at10", 41.3" x 32.3" Inside Tank Dimensions, 208-230/3/60 Power Requirement, Mitsubishi M-700 Control, X & Y Glass Scale Feedback, Auto Wire Threading, Wire Chopper, Chiller
 
Click for Price
Ref No: 8068279
 
2002 Niigata Ultima UN385/23E Electric

 27.95" x 27.95" Tie Bar Spacing, 40.16" x 40.16" Platen Size, 51.97" Daylight, 2.36" Screw Diameter, 25.59" Clamp Stroke, 220V, Niigata Control, Air Blow 

 
Click for Price
Ref No: 8068280
Tonnage: 385.0
Shot Size: 23.08
 
2011 Flow M2-3120b
6'6" x 10' Table Size, 30 HP, 55,000 PSI, 460/3/60 Power Requirement, FlowMaster PC Control
 
Click for Price
Ref No: 8068278
 
1997 Van Dorn 230-RS-20F

 32" x 32" Platen, 22" x 22" Tie Bar Spacing, 3.75" Tie Bar Diameter, 20" Clamp Stroke, 42" Max Daylight, 7" Mold Thickness, 230V, Pathfinder 1000 Control, HKO, CP

Click for Price
Ref No: 8068277
Tonnage: 230.0
Shot Size: 20
 
1995 Van Dorn 230-RS-20F

 32" x 32" Platen, 22" x 22" Tie Bar Spacing, 3.75" Tie Bar Diameter, 20" Clamp Stroke, 42" Max Daylight, 7" Mold Thickness, 230V, Pathfinder 2500 Control, HKO, CP

 
Click for Price
Ref No: 8068276
Tonnage: 230.0
Shot Size: 20
 
2010 Omax Maxiem 1515

5'2" x 5'2" Table Size, 30 HP, 50,000 PSI, Omax CNC Control

Click for Price
Ref No: 8068275
 
1995 Fadal VMC-3016
30" x 16" x 20" Travels, 21 Position ATC, 7,500 RPM, 15 HP, CAT 40 Taper, Fadal CNC Control
 
Click for Price
Ref No: 8068274
 
1998 Routech Routomat

3-Axis CNC Router, (2) 5' x 5' Tables, 10 HP, 10 ATC

Click for Price
Ref No: 8068273
 
2017 Nanjing Granuwel Machinery Co. GDE-150/120-315-33

 150 mm Screw Size, 33:1 LD Ratio, 315 kw (422 horsepower), Approx. Output 800 - 1500 kgs/hr. (1600 - 3000 lbs./hr.), 1000 mm (39") Center height, Hydraulic Screen Changer W/Powerpack, Hopper with Crammer Feeder, "Beringer" Style Pelletizing System

 
Click for Price
Ref No: 8068272
 
2017 Omax Maxiem 2040
6'7" x 13'10" Table Size, 40 HP Pump, 50,000 PSI, 460/3/60 Power Requirement, Omax Mobile Control
 
Click for Price
Ref No: 8068270
 
1998 Fadal VMC 6030
60" x 30" x 30" Travels, 30 Position ATC, 10,000 RPM, 22 HP, Cat 40 Taper, Fadal CNC Control, Rigid Tapping
 
Click for Price
Ref No: 8068271
 
1999 Toyo TM300H

28.74" X 28.74" Distance Between Tie Bars, 37" X 37" Platen Size, 22.83" Clamping Stroke, 9.84"/25.60" Min/Max Mold Height, 5.51" Ejector Stroke, 50 HP, PLCS-9 Control 

 
Click for Price
Ref No: 8068269
Tonnage: 300.0
Shot Size: 32.8
 
2013 Makino EDAF2
13.77" x 9.84" x 9.84" Travels, 16 Position Tool Changer, 30A AMP Power Source, 208/220V/3ph Power Requirement, MGH6 Control, C-Axis, Erowa Chuck, Chiller
 
Click for Price
Ref No: 8068268
 
2012 Haas TM-1P
30" x 12" x 16" Travels, CAT 40 Taper, 7.5 HP, 10 ATC, 6,000 RPM, Haas CNC Control, Rigid Tapping
 
Click for Price
Ref No: 8068267
 
2006 Komo VR510 * NEW PHOTOS ADDED *
3 Axis, 1 Spindle, 15 HP, 24,000 RPM, 10 ATC, 5' x 10' Table Size, Fanuc 210i Control
 
Click for Price
Ref No: 8068173
 
2010 AOKI SBIII-250LL-50S *PRICE LOWERED*

 64mm Extruder Screw Size, 17,500 PSI, 460v Power Requirement

Click for Price
Ref No: 8039389
Tonnage: 55.0
Shot Size: 15.5
 
2013 AOKI SBIII-250LL-50S *PRICE LOWERED*
64mm Extruder Screw Size, 17,500 PSI, 460v Power Requirement
 
Click for Price
Ref No: 8039387
Tonnage: 55.0
Shot Size: 15.5
 
2013 AOKI SBIII-250LL-50S *PRICE LOWERED*
68mm Extruder Screw Size, 17,500 PSI, 460v Power Requirement
Click for Price
Ref No: 8039386
Tonnage: 55.0
Shot Size: 17
 
2010 Doosan HP-4000 * PRICE LOWERED *
15.75" x 15.75" Pallets, 23.6" x 22" x 23.6" Travels, 60 ATC, 14,000 RPM, Cat 40 Taper, 1 Degree Indexing, Fanuc 31i-A Control, Chip Conveyor, Through Spindle Coolant
 
Click for Price
Ref No: 8039320
Page 2 of 3
52 Machines Available