New Arrivals

New arrival listings will drop off after two weeks.
All available machinery may be viewed by using the tabs above.

Clamshell Style Rotational Molder, 3 Cooling Stations, 14' 5" x 44" Swing Diameter, 1500 lbs Max Load/arm, Allen Bradley Controls

10' X 20' ,  6-8LP PLASMA SYSTEM WITH Brand New MG Global Controller Retrofitted in 2009 and 200 AMP High Definition Plasma System.

 Maximum Mold Size   10" x 16", Clamp Force   50 Tons, Maximum Ejector Stroke   1.97", Maximum Clamp Stroke   13", Maximum Mold Height   6"
 Maximum Daylight   19",  Equipped With Vertex NT Control, 20HP, (2) or (4) Station 48" Rotary Table, Under Power, Machine voltage 460, (2) Machines $32,500.00 Each

Dual Pallet Laser, 1700 Watt, Fanuc Control, Less than ~14,000 Hours

(2) 15.8" Pallets, 22" x 20" x 20" Travels, 10,000 RPM, 19HP, CAT40 Taper, 40 Tools, 1 Deg Indexing, (2) 10" x 10" x 19" Tombstones Included, UNDER POWER!!

40" Front Operated Power Backgauge (ELGO 45 Set & GO), Squaring Arm, Foot Switch

Bolt on Turret, LOW HOURS, 8.3" Chuck, 12" Centers, Turn Dia. 11"

10" Chuck, 3" Bar, 48" Centers, Rigid Tapping, Tailstock, Tool Post, Under Power

LOW LOW HOURS, MSG 501 Control, Dual 12 Position Turrets, Live Tooling On Both Turrets, Y-Axis on Upper Turret, Dual 30 HP Spindles with 10" Chucks, 2.8" Bar Capacity, Parts Catcher, Chip Conveyor

"Circuit Board Cnc Router", Load/Unload Design, Westwind Model 320-43 Air Bearing Spindle, Water Cooled Spindle, Panel Capacity, Tool Management System, Sieb & Meyer CNC Controls, Includes Chiller

Yasnac I-80M CNC Control, Travels 60" x 25.59" x 25.59", CT 40, 20 HP, 30 ATC

Fanuc OM-C Control, CT 40, 7.5 HP, 6000 RPM, Travels 15.7" x 11.8" x 19.5"

Fanuc OMC Control, Travels 41.3" x 21.7" x 22", 6000 RPM, 7.5 HP, 30 ATC, 40 Taper

Tool Pre-Setter, Chip Conveyor, Floppy drive

 Top Hopper Opening, Single Shaft Shredder (30” w x 10” Diameter) 32” x 96”, Feed Throat Opening 32” x 40”, 40 Horsepower, Hydraulic Ram Feed, 480v – 3ph

Fusion CNC, 40" x 20" x 20" Travels, 12,000RPM, 30ATC, CAT40 Chip Conveyor

Chip Conveyor

 40" x 20" x 25" Travel, 24ATC, Floppy, P-Cool, Gear Box, CAT40, Rigid

5' x 10', 30HP, 60KPSI, CNC Waterjet Cutting System with KMT Pump and Upgraded Controller

Fanuc0T, Parts Catcher, LNS Quick Load Bar Feeder