New Arrivals

New arrival listings will drop off after two weeks.
All available machinery may be viewed by using the tabs above.

21 station Tool Changer, 4,164IPM Axis Speeds,

2"Bar, 18" Swing Over Bed, 21" Centers, 8" Chuck, Tail Stock, Chip Conveyor, 10HP, 3,500RPM, Fanuc OT, 8 Station Turret,

Chip Auger, 15" Chuck, 10 Turret, 4" Bar Capacity, 25.5" Turning Diameter

Platen Size   28" x 28",  Min Mold Height   11.81",  Daylight   23.62",  Voltage   460 Volt,  Equipped With Niigata Control,  61" Rotary Table  

5000 RPM, Gear Box, Rotary Table, P-Cool

Parts Warranty until July 2010, 20HP, Chip Auger, P-Cool, SMTC

 2" Bar, 4,000RPM, 20HP, 17" Centers, 23" Swing

Fanuc OMC Control, Travels 41.3" x 21.7" x 22", 6000 RPM, 7.5 HP, 30 ATC, 40 Taper

Magazine Bar Loader

Mitsubishi 32 Bit Control, Chiller, Automatic Pallet Shuttle System

10,000 RPM, 15" Monitor, High Flow Coolant, P-Cool

21ATC, 60" x 30" x 30" Travels, 4th Axis Pre-Wire, High Torque, 10,000RPM, Rigid Tap

Tail, Fanuc, 2" Bar, 21" Centers, 4000RPM,

Complete Automated Welding Cell including Robot with Easy to Use Teach Controller, Powerfula and Programmabel DP400 Welding Power Source, and OTC Daihen ARC Cell with Rotary Table  - System is Production Ready

 5 – Axis Cnc Router, Single 10 Horsepower HSP Spindle, 36” Z-Travel, Auto Tool Changer, Single 60” x 120” Table Size, 91000 Super Controller, Includes; Reneshaw Teaching Probe, Safety Enclosure

2' X 10" Fully Automatic Programmable Bandsaw with 1" blade and a 16" Shuttle Stroke

24" chuck, 5.6" Bar Cap. MSC-516 Control, 12 Turret, Chip, Tail

40" x 20" x 25", 12,000 RPM, CAT40 Taper, 40 Position Sidemount ATC, 300 PSI Thru Spindle Coolant, Quad-Pallet APC, Aux Filter, 80 Gallon Coolant, High Intensity Lighting, Power Failure Detection, Coordinate Rot & Scaling, 3 1/2" Floppy Drive, Spindle Orientation, Remote Jog Handle, Visual Quick Code, Some Tooling Included UNDER POWER

Pressure/Vacuum Former, Max Mold 72” x 48”, Top & Bottom Ceramic Oven, Electric Motor Driven Top & Bottom Platens, 40/48” Platen Stroke, Pressure Bladders

Sub Spindle, 20HP, 4000RPM, Rigid Tap, USB, 8" Main, 5" Sub