Activate Pricing

Need to see our prices?

Please click on the "Activate Pricing" button below.
You'll be asked to fill out a short form, then we'll send you an email.
Click on the email verification link.
This will take you back to our main screen, where pricing will be activated.

An Important Note:

Some machinery may show as "Call for Price" due to our customer's request of confidentiality.
Please give us a call, and we'll answer your pricing questions.
You can also fill out our "Inquiry Request" on email, and you'll hear from us shortly.

Already activated and prices not showing?

You may be using a different device or browser than the one you originally activated. Just re-enter your email on the "re-verify" link, and you'll see our pricing.

If you have any other questions, please give us a call, send an email, or click on live chat.
We're here to help.

Activate Pricing
 
In the USA: 1 (800) 922-1674
International: 1 (480) 922-1674
Live Chat:
The Industries Most Trusted Source to Buy and Sell Used CNC, Plastics, and Sheet Metal Fabrication Machinery.
   

New Arrivals

New arrival listings will drop off after 15 days
All available machinery may be viewed by using the tabs above.
All available machinery may be viewed by using the navigation.
Filter by Machine Type
Filter by Make
Page 6 of 7
135 Machines Available
 
2010 Mitsubishi/Dener Elite 120-30

132 Ton x 119", EAS 560 Touch Screen Control, Backgauge CNC Y1, Y2, X, R, manual Z, Distance Between Housings 101", Stroke 11", Throat Depth 17.7", Open Height 19.1", Closed Height 8.1", Power Requirement 480/3/60

 
Click for Price
Ref No: 7791172
Tonnage: 132.0
 
2010 Mitsubishi/Dener Ultra 135-30

149 Ton x 119", EAS 550 Touch Screen Control, Backgauge CNC Y1, Y2, X, R, Z1, Z2, Distance Between Housings 122", Stroke 12.6", Throat Depth 17.7", Open Height 21.7", Closed Height 9.1", Power Requirement 480/3/60

Click for Price
Ref No: 7791170
Tonnage: 149.0
 
2014 Mitsubishi/Dener Elite XL 135-36

 149 Ton, 142" Length, 12" Distance Between Housings, 12.6" Stroke, 17.7" Throat Depth, 21.7" Open Height, 9.1" Closed Height, 480/3/60, EAS 560 Touch Screen Control, Y1,Y2,X,R,Z1,Z2 CNC Backgauge

 
Click for Price
Ref No: 7791175
Tonnage: 149.0
 
1991 Sterling Accumulator Head Blow Molder

 Sterling Accumulator Head, 45 lb. Shot Capacity, Single Head, "Set-up to receive large head tooling, 56" x 72" Platen Size, 200 Ton Clamp, 66"/10" Daylight, 6.0" Extruder, 300 Horsepower Motor, Maco 8000

Click for Price
Ref No: 7791083
 
1987 Sterling Accumulator Head Blow Molder

 Sterling Accumulator Head, 40 lb. Shot Capacity, Single Head, "Set-up to receive Large Head Tooling, 50" x 60" Platen Size, 150 Ton Clamp, 66"/10" Daylight, 4.5" Extruder, 200 Horsepower Motor, Maco 8000

Click for Price
Ref No: 7791082
 
2016 Ishida IXGA2475

X-Ray Inspection System with Software and Product Key

 
Click for Price
Ref No: 7788497
 
1985 Improved B20-40H

 20" x 21" L Platen Size, 2.0" Extruder, 30 Horsepower, Moog Parison Programmer

 
Click for Price
Ref No: 7785932
 
Leesona Chill Roll Stack

 40" Wide x 12" Diameter Chrome Rolls, Chain Driven Rolls, Rubber Pull Rolls, Temperature Zone Control Per Roll

Click for Price
Ref No: 7787786
 
2015 YAG TQL-LCY500-0505

Laser Power 500W, Laser Type YAG, Laser Wave 1064nm, Processing Scale 500 * 19.685", X Axis Stroke 19.685", Y Axis Stroke 19.685", Laser Line Width 0.005905512", Cutting Thickness 0.23622", Location Precision plus/minus 0.001181102"/m, Re-location Precision plus/minus 0.0007874016", Power Demand 380V/50Hz, Cooling Way Water Cooling, Weight 2400 Lbs, Outline Size Inches 83" * 31" * 53"

Click for Price
Ref No: 7787668
 
2014 Alltra WJ30-9

 10'4" x 6'8" Table Size, 60 HP Pump, 60,000 PSI, ALLTRA PC-Based Controller, Waterjet Automatic Height Control, Water & Abrasive Collection Tank, Garnet Removal System, Protective Bellows System, Closed Loop Chiller System

 
Click for Price
Ref No: 7787621
 
2007 Litz CV-1400

 55" x 31" x 29" Travels, 24 ATC, 6,000 RPM, Cat 50 Taper, 25 HP, 220V, 59.1" x 33.5" Table Size,, 4,410 Max Load Capacity, 3.9"-35.4" Spindle Nose to Table, Fanuc OiMC-A Control, Coolant, Rigid Tapping, Chip Auger

 
Click for Price
Ref No: 7787636
 
1998 Okuma & Howa Milac 630 **PRICE LOWERED

 24" /24" Pallet Size, 40" x 32" x 32" Travels, 80 ATC, 10,000 RPM, CAT 50, 40 HP, 220V, Fanuc 16 Control, Full 4th Axis, Chip Conveyor, Thru Spindle Coolant, Spindle Air Blower, Spindle Oil Cooler, Enclosed Splash Guards

 
Click for Price
Ref No: 7786389
 
1997 Van Dorn 80-ET *PRICE LOWERED*

Distance between Tie Bars 15.7" x 15.7", Platen 23.2" x 22.8", Clamp Force 90 Ton, Clamp Stroke Max 17.7", Open Daylight Max 27.6", Mold Thickness Min 9.8", Ejector Force 4.6 Tons, Ejector Stroke 5.9", Machine Weight Apprx 7,940 lbs L X W X H 12.7' x 4.6' x 5.9', Equipped With Solid State Control, HKO, CP, RI

Click for Price
Ref No: 7786379
Tonnage: 80.0
Shot Size: 2.07
 
1998 Van Dorn Ergotech-110 *PRICE LOWERED*

23.62" x 23.62" Platen, 16.54" x 16.54" Tie Bar Spacing, 29.53" Max Daylight, 9.84" / 29.53" Min / Max Mold Height, Ergo Control, HKO, RI

 

Click for Price
Ref No: 7786376
Tonnage: 110.0
Shot Size: 3.59
 
1998 Toyo 90H

14.17" x 14.17" Tie Bar Clearance, 21.26" x 20.08" Die Plate Size, 90 Ton Clamping Force, 12.60" Clamping Stroke, Min/Max Mold Height 5.91"/13.78", 4.5 Tons Ejector Force, 3.15" Ejector Stroke, 460 V, PLCS 9 Control, HKO, CP    

 
 
Click for Price
Ref No: 7786328
Tonnage: 90.0
Shot Size: 5.5
 
1997 Atlantic HDS 12' x 5/8"

5/8" x 12' Thickness x Length, SC7p Control, Back Gauge, 40" Squaring Arm, Hydraulic Holddowns

Click for Price
Ref No: 7786121
 
1997 Engel ES200-60 TL

 Platen Size 22.59" x 16.93", Daylight 7.48"-20.47", Max Stroke 13.00", Min Mold Height 7.48", Voltage 460V, Equipped With A03-EC100 Control, HKO, RI, Under Power!

 
Click for Price
Ref No: 7786056
Tonnage: 60.0
Shot Size: 2.2
 
1993 Wysong PH175-168

175 Tons, Bed Length 14', Distance Between Housings 150", Stroke 8", Open Height 17", Closed Height 9", 3 Speed Ram 300/250/22IPM, Throat 8", 480/3/60, GC-6000 Controller, 3 Axis Backgauge

 
Click for Price
Ref No: 7786031
Tonnage: 175.0
 
2001 Lagun GBM 22E * PRICE LOWERED*

78.7" x 39.4" x 39.4" Travels, 30 Automatic Tool Changer, 3,000 RPM, Cat 50 Taper, Siemens 840D CNC Control, 30 HP, 4th Axis Rotary Table, 300 PSI High Pressure Coolant Pump

 

Click for Price
Ref No: 7785632
 
1997 Engel ES2750 500WP-EL

Platen 59.05" x 47.24", Tie Bar Spacing 44" x 33", Max Clamp Stroke 27.56", Min / Max Mold Height 11.81" / 33.94", Min / Max Mold Height 11.81" /33.94", Ejector Stroke 9.45", Electrics 460/3/60, Dimensions Clamp 17' x 8'3" x 8', Dimensions Injection 16' x 7' x 8', Weight 7,300 lbs, Equipped with: CC90 Control, HKO, CP, RI, New Screw Installed May 2012, 47,000 Hours, Wide Platen Machine

Click for Price
Ref No: 7784250
Tonnage: 500.0
Shot Size: 64
Page 6 of 7
135 Machines Available