15,000 RPM, Through Spindle Coolant, Chip Conveyor, 4th Axis .001 deg

      KD CAPITAL EQUIPMENT
      16454 N. 91st Street, Suite 101
      Scottsdale, AZ 85260
      Phone (480) 922-1674 - Fax (480) 922-1675
      www.kdcapital.com
      sales@kdcapital.com

 ID#: 786906
 
 One (1) 1992 MATSUURA MAM-600HF-PC-2
 
 X Axis Travels   23.6"
 Y Axis Travels   22.4"
 Z Axis Travels   21.6"
 From Pallet Surface to Spindle Center   3.1"-25.5"
 Pallet Center to Spindle Gauge Plane   3.9"-25.5"
 Table (Pallet)  
 Pallet Working Surface   15.7" x 15.7"
 Pallet (Table) Loading Capacity   882 Lbs
 Pallet Surface Configuration   Tapped Holes
 Min Table Indexing Angle   1 deg
 Table Indexing Time   3 Sec/90 deg
  ........................................................................................  3.7 Sec/180 deg
 Table Clamping Force   K-N 48
 Spindle  
 Spindle Speed Change Command   S4 Digits Direct
 Type Of Spindle Taper Hole   7/24 Taper # 40
 Spindle Bearing Inner Diameter   3.14"
 Max Spindle Torque   35.7 kgf-m
 Spindle Air Blow   Standard
 Spindle Orientation   Standard/Electrical
 Feedrate  
 Rapid Traverse Rate (X/Y/Z)   944.8"/Min
 Feedrate (X/Y/Z)   0.1"-393.7"
 Jog Feedrate   0-157.4"
 Min Movement Increment (X/Y/Z)   0.001
 Automatic Tool Changer  
 Type of Tool Shank   JIS B 6339 Tool Shank 40T
 Type of Retention Knob   JIS B 6339 Pullstud 40P
 Tool Storge Capacity   60 (Incl Provision of 180
  ........................................................................................  Tool Magazine Base)
 Ditto (Optional Specifications)   90,120,150,180,210,240
 Max Tool Diameter   3.14"
 When the Pockets on Both Sides are Empty   5.9"
 Max Tool Length   13.7"
 Max Tool Mass   10 kg
 Method of Tool Selection   Address Code and Randon

  ........................................................................................  Selection Bi-Directional
  ........................................................................................  Magazine Rotation
 Tool Changing Time (Tool to Tool)   2.4 sec
 Tool Changing Time (Chip to Chip)   6.0sec 20% of Z Axis Stroke
  ........................................................................................  Spindle at 1000 RPM
 Tool Pocket Pitch   3.2"
 Automatic Pallet Changer  
 # of Pallets   2
 Method of Pallet Change   Turn Table Methods
 Pallet Changing Time   10 sec
 Pallet Clamping Force   48 K N
 Weight of Pallet/PC   185.22 Lbs
 Pallet Size   15.7" x 15.7"
 Pallet (Table) Loading Capacity   882 Lbs
 15,000 RPM Spindle with Air Dryer  
 Rigid Taping  
 Through Spindle High Pressure Coolant  
 Lift up Chip Conveyor  
 Full 4th axis table .001 deg  
 10 HP  
 -
 Price:  $24,900.00