41.3" x 31.5" x 11.6" Workpiece Dimensions, 3,300 lbs Max Workpiece Weight, 19.7" x 13.8" x 11.8" Travels, Auto Thread w/ Chopper, Chiller, Linear Glass Scales, Windows XP Operating System, UNDER POWER

      KD CAPITAL EQUIPMENT
      16454 N. 91st Street, Suite 101
      Scottsdale, AZ 85260
      Phone (480) 922-1674 - Fax (480) 922-1675
      www.kdcapital.com
      sales@kdcapital.com

 ID#: 5999687
 
 One (1) 2008 MITSUBISHI FA-20S Advance
 
 Tank Size: 42" x 32" x 12"  
 Max Part Size   41" x 31" x 12"
 Max Part Weight   3,300 Lbs
 Table Size   30.7" x 24.8"
 Machining Range: X-Axis x Y-Axis   19.7" x 24.8"
 Max Z-Axis Height   11.8"
 U-V Axis Travel (From Center)   +/- 3.0
 Taper Angle @ Thickness   15 Degrees @ 10.5
 Wide Angle Taper (optional Guides Required)   45 Degrees @ 2.4"
 Feed Rates: Table Rapid Feed   51.2 IPM
 Wire Diameter Possible   0.004- 0.012
 Minimum Start Whole Diameter   0.02
 Max Wire Spool Size  Standard / Optional   22 lb / 44lb
 Filters / Type   2 / Paper
 Filter Tank Capacity   195 gal
 Equipped With:  ........................................................................................ 
 Submerged Machining to 11.6" Deep   Auto Fluid Level Control
 Auto Vertical Machine Tank Door   4 Sided Work Table
 Fine Grain Dianite Table Casting Material   Windows XP Op System
 Auto Thread w/ Chopper   Power Master Control
 Suspened / Immersed Cutting   Linear Glass Scales
 Dielectric Fluid Chiller Standard   Wire Tensioning System
 Hours:                          !! Less than 350 Hours!!  
                         !! Inspect Under Power !!  
 Machine Dims: 101.5" x 109" x 84.6" Height                                Weight:   9,116 Lbs
 Power Req: 200-230V (13.5) Built in AVR  
 Comp. Air Req: 2.7 cu.ft / Min @ 71-100 psi  

 -
 Price:  $99,500.00