2011 Ebbco Closed Loop System
Click for Price
60,000 BTU Chiller, and Settling tank
Ref No: 7796745
* Important: All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale.
Any agreement to purchase or sell machinery must be in writing.
KD Capital Equipment LLC
7918 E McClain Drive Suite 101
Scottsdale Arizona 85260
Phone: (480) 922-1674 - Fax: (480) 922-1675
Ref # 7796745
One (1) 2011 Ebbco Closed Loop System
WATERJET CUTTING, CNC
Closed drain operation
CLS 60,000 BTU closed loop style chiller with Glycol
Main Unit 66" x 36" x 72"
Chiller 75" x 70" x 37"
Settling tank 28" x 40" x 36"
System can service single or multiple heads on any waterjet table.
The closed loop polishing filtration system is designed to allow the user to shut off the overflow to drain and capture this overflow for reuse by polishing it with proper equipment.
The system operates using the overflow from the cutting table/work cell if the overflow is inadequate; the float level control opens a valve to supply make-up water into the dirty tank.
Water from the dirty tank is first pumped through an ultra fine bag pre-filter before it is polished to remove solids above 0.35-micron and then feeds a 1 cuft.
Resin vessel filled with cation and anion resin.
This water is deionized to an adjustable ppm rating and returned to the clean tank.
The clean tank overflows to the dirty tank to ensure that there is always a positive level of clean water for the intensifier feed pump.
The water is pumped to the intensifier at the required rate.
The system is equipped with an ultraviolet ozone generator to control biological fouling agents; a diffusion stone hangs in the clean tank to disperse ozonated air.
Service beacons are provided to indicate when the filter bag needs changing and when D.I. resin requires service.