Activate Pricing

Need to see our prices?

Please click on the "Activate Pricing" button below.
You'll be asked to fill out a short form, then we'll send you an email.
Click on the email verification link.
This will take you back to our main screen, where pricing will be activated.

An Important Note:

Some machinery may show as "Call for Price" due to our customer's request of confidentiality.
Please give us a call, and we'll answer your pricing questions.
You can also fill out our "Inquiry Request" on email, and you'll hear from us shortly.

Already activated and prices not showing?

You may be using a different device or browser than the one you originally activated. Just re-enter your email on the "re-verify" link, and you'll see our pricing.

If you have any other questions, please give us a call, send an email, or click on live chat.
We're here to help.

Activate Pricing
 
In the USA: 1 (800) 922-1674
International: 1 (480) 922-1674
Live Chat:
The Industries Most Trusted Source to Buy and Sell Used CNC, Plastics, and Sheet Metal Fabrication Machinery.
   
2018 Flow Mach 2 2031b
Click for Price

 6.6' x 10' Table Size, 30 HP, 60,000 PSI, 460/3/60 Power Requirement, Flowmaster Software Suite Control

 
Ref No: 7797143
* Important: All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale.
Any agreement to purchase or sell machinery must be in writing.
Full Machine Specifications
 KD Capital Equipment LLC
7918 E McClain Drive Suite 101
Scottsdale  Arizona  85260
Phone: (480) 922-1674 - Fax: (480) 922-1675
www.kdcapital.com
sales@kdcapital.com
 
Ref # 7797143
 
One (1) 2018 Flow Mach 2 2031b
WATERJET CUTTING, CNC
 
General Specifications:
Table Size 6.6' x 10'
HP 30
PSI 60,000
Power Requirement 460/3/60
Table Travels 6.6" x 10 x 7"
Intensifier Pump 30SA-60 ESL
Abrasive System With Low-Level Shutoff Sensor 100 lbs
 
Equipped With:
Flowmaster Software Suite Control
Fully-Programmable Servo-Driven Z Axis
Roll-Around Control 15" Touch Screen Control Console
Imports Industry Standard DXF, DWG, IGS, CADKEY, CDL, And HPL Files
Lift The Z-Axis Up Between Traverse Movements To Clear Any Potentially Remaining Slugs
X And Y-Axis Utilize Linear Bearings And Hardened Precision Ground Ways
Ultra Pierce For Brittle & Composite Material Without Delamination
Auto-Lube System
Paser 4 Cutting System
Laser Edge Finder Finding Exact Position On Workpiece
Final Filter Weir System Prior To Discharge To Sewer
 
Notes:
Never Been Installed Zero Hours
Automatically Compensate Speed For Varying Thickness
Includes Pallet Of 80 Grit Garnet
Including Approx 25 Mixing Tubes, 5 Orfices, 2 On/Off Valves 40 Blast Disks, 20 Spray Shields And Spare Filter
 
Click picture to enlarge
 
* Important: All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale.
Any agreement to purchase or sell machinery must be in writing.