Customer Testimonials

Tom,
 
The Haas VM-3 we got from you hit the floor running and hasn't stopped since!  It was basically a brand new machine for a fraction of the cost.  This is our second purchase from you and we are very pleased.  We'll continue to look to you in the future for more machines.
 
Chad-South Dakota
------------------------------------------------------------------------------
Tom at KD was helpful, fair and thorough. He helped me through the purchase of two clean Mini-Mills. They are on our floor and working well. I will definitely call Tom agian.
 
Luke- CA
------------------------------------------------------------------------------
George,
Another Thank you for your sale of our machine.  John, The rigger you set up was completely prepared, was here early and patiently waited for a 9:00 am truck that arrived much later.  The machine left our facility at 2:45 pm, strapped well and tarped.  Your really good at what you do.
Thank you

Barry
------------------------------------------------------------------------------
Thanks Tom, Your cooperation and attention in the sale of the one year old VMC was a smooth transaction, everthing advanced on the schedule that you promised. I can't imagine a cleaner preowned machine, it,s better than I expected. I would now like you to find me a wire EDM, such as a Sodick AQ750L, or similar large capacity, late model wire machine

Phil-Pennsylvania
------------------------------------------------------------------------------
I had been looking for a good used HAAS MiniMill, and Tom Cardone of KD Capital made it happen.  This was the first time I had dealt with KD, and Tom came through every step of the way.  He found me exactly what I was looking for: a clean 2006 machine with low hours and several important options.  Tom keeps up prompt phone and e-mail communication.  He is honest, courteous, and did everything necessary to make the deal a smooth one.  I can definitely recommend Tom Cardone and the rest of the guys at KD Capital to anyone looking for good used equipment priced very well.
 
Jack -California
------------------------------------------------------------------------------
The entire transaction, including paperwork and fund transfers was taken care of by KD Capital Equipment. The sale and transfer of equipment was handled in a very efficient and professional manner. I would go through them again for the purchase or sale of equipment.

Jim-Michigan

-------------------------------------------------------------------------------

I had Contacted Tom Cardone at K.D.Capital with regards to a used Bridgeport mill. I purchesed and recieved this machine in Toronto Canada with Tom's Help. I am so happy with this machine and my art will now come to life. Thanks Tom, you were a great help.

Shaun-Ontario

-------------------------------------------------------------------------------
Cris,
Thanks again for all your help with purchasing our first CNC machines. KD Capital and yourself did an outstanding job helping us purchase, rig, inspect, and transport our machines. I was at first hesitant about buying something so huge and expensive in used condition that was located so far away. Next time we are looking for a good used machine you will be the first person I call.
Take care!

Nathan-Minnesota
-------------------------------------------------------------------------------

I highly recommend doing business with Mike and the staff at K.D. Capital. They went the extra mile to help with my CNC equipment search, and along the way proved that they were an honest and true to their word. This means everything when navigating the used cnc jungle.

Norbert -New York
-------------------------------------------------------------------------------

It was a pleasure dealing with Tom and KD Capital.  When we needed to sell a piece of equipment to make room for a new machine Tom stepped in and offered a perfect solution.  KD Capital will always be our first choice when purchasing or selling any used equipment.  Their customer service and response time are second to none!
 
Andy - New Hampshire
-------------------------------------------------------------------------------
Dealing with KD-Capital to sell my used cnc equipment was a pleasure.  My machines were sold quickly and for a fair price.  Our sales person Tom Cardone was a great help in getting the job done.  We have used Tom numerous times to both buy and sell machines.  He always goes above and beyond to get the job done.  KD-Capital and Tom is the kind of company you need to work with to stay ahead of the game.
 
Thanks KD and Tom
Keith-Massachusetts
-------------------------------------------------------------------------------
Tom,

It is with great pleasure that I give a testimonial to the fine people over at KD Capital Equipment.  Our quickly expanding company recently purchased a pre-owned 2005 Haas SL10T from KD Capital Equipment through Tom Cardone.  This was an instance of nearly too good to be true as the machine was recieved in a nearly brand new condition with super low hours for an incredible price.  From all the information I can compile, we acquired a machine for nearly $15k less than it's value.  Tom is extremely knowledgeable, curteous, concise, and extremely punctual with returning phone calls and emails.  Purchasing a CNC is a large business transaction and Mr. Cardone's professionalism put any uneasiness at bay.  Truly a pleasure to do business with.  When you're in the market for quality pre-owned CNC machinery at unhead of prices, look no further than KD Capital. 

Rob-Georgia
-------------------------------------------------------------------------------

Luciano,
 
Hola que tal, te aviso que el torno mori seiki esta instalado y funcionando a la perfección, te agradecemos de parte de Ruben y mia, todas tus atenciones, así como avernos conseguido este equipo que esta en muy buenas condiciones y precio, espero que el año que viene sea igual de exitoso para ti así como todos tus compañeros, amigos, y familiares cercanos.
 
me despido de ti tu con una afectuoso saludo tu atento servidor
 
Victoriano Ramos Rivas

Tamaulipas-Mexico
-------------------------------------------------------------------------------
Jeff,
The Mori Seiki we just purchased from KD Capital Equipment looks brand new. This thing is mint!! My production manager was elated when he first saw it and our maintenance tech said the machine is well within factory specs for accuracy.Your company’s expertise with the CNC products certainly gives you a leg up on your competition. My plan is to phase out 3 more of our older Moris and put 1 more of the multi tasking machines in early next year. I’ll be in touch as we get closer.

Terry-Texas
-------------------------------------------------------------------------------
"We purchased a VF-4 from KD Capital and delivery was made two business days later! The salesman we dealt with, George Malouin, was very knowledgeable and courteous. He provided excellent communication from the time of first contact to the time the machine was delivered. The machine was exactly as described and everything went as expected. We are very pleased with our experience and will definitely contact George the next time we're in the market for another machine."

Bob-California
------------------------------------------------------------------------------
Estimado Luciano,
En agradecimiento a tu atento y eficiente servicio el la compra del Centro de Maquinado Vertical Cincinnati. Tienes mi confianza para cualquier transacción en el futuro. Tu dedicación y deseos de satisfacer las necesidades primordiales de tus clientes son muy importantes. Mis mejores deseos para ti y tus seres queridos. Mis sinceras recomendaciones como proveedor de maquinaria usada.
 
Leonardo
México
------------------------------------------------------------------------------
“They’ve always taken care of any unusual issues in the past and they have a great reputation with me and other people in my industry that talk about them... (and yes, we do talk about them!!”)

Brad-Montana

------------------------------------------------------------------------------

I was unable to find a piece of equipment that I needed desperately for a new contract. I notified Chris Mulvihill and within 2 days he found the machine for less than what I wanted to spend. I will be doing business with K.D. for a long time.”

Peter-South Carolina
------------------------------------------------------------------------------
“ My dealings with K.D Equipment have been quite pleasurable to say the least. Not only did Cris help me with the purchase, he also helped set up the transportation and rigging. He made it very simple and I have since purchased 3 more machine.”

William- Texas
------------------------------------------------------------------------------
“I have delt with a lot of used machinery dealers and rarely do you find a salesman who’s main concern is the needs and expectations of their customer which by the way were exceeded. Cris and the other salesmen at K.D. truly set the bar for customer service, attitude and a commitment to quality. Refreshing to say the least.”

Craig-Georgia
------------------------------------------------------------------------------

George,

I am looking forward to doing more business with you over the next year or two.  I am grateful for your help in getting this machine to us in a timely manner.  We are in a great market position and with the help of people like you we will take advantage of the market position and make significant in roads to taking more market share.  Keep us in mind for more equipment that we can put to good use.

Marion-Arizona

------------------------------------------------------------------------------

Jeff,
Just a quick note on the Mazak horizontal you sold us. The machine showed up exactly as you represented and is now in full production running flawlessly.  Please keep me in mind should another machine like this become available. Thank-you again for all your efforts.

 Frank-Michigan
-------------------------------------------------------------------------------

 Jeff,
Thanks for a professional job on the Mazak Integrex you bought from us. The transaction went very smooth. I look forward to working with you on up and coming projects.

Scott-California
-------------------------------------------------------------------------------

Tom, you know it takes a while to develop a new customer, in any business. I thank you for being so patient with me during the purchase of  the Sharp mill. After receiving the machine I was amazed at the condition that is was in. I  had made a pretty good deal. Tom, this machine and the tooling was more than I ever could have expected. The rigging information was right on.

Thank you again,

Lenny-Pennsylvania

-------------------------------------------------------------------------------

Hi Mike, the dust has settled on our move and I would like to thank you and KD Capital for buying our equipment at fair market value and meeting our stringent time frame.  I especially appreciate your flexibility and professionalism to accurately appraise machinery and the systems you have in place for expert heavy equipment evaluation and removal.  Thanks again Mike for making our transaction a positive experience.

Bill-California

-------------------------------------------------------------------------------

I especially enjoyed Nick's integrity and easy manner in completing the sale of our equipment.  Our equipment was sold overseas creating somewhat of a complicated transaction.  Nick handled all the details for us, making the entire experience very simple.

Karen-California.
 
-------------------------------------------------------------------------------

KD Capital is a veritable diamond in the rough world of machinery sales.  They made selling our machine not only easy, but a true pleasure!
 
Dan-FL

--------------------------------------------------------------------------------
I have dealt with Nick Kirby at KD Capital Equipment for a number of years and have always received information back from them quickly.  I have recently purchased a used grinder from them and I am very happy with the price, delivery timing and service .  Highly recommend KD as a supplier for used equipment.

Don-B.C. Canada

--------------------------------------------------------------------------------
Dealing with Nick was a real pleasure. Very helpful and very quick response.

Tex-TN

--------------------------------------------------------------------------------
JEFF,
THANKS FOR ALL YOUR HELP ON OUR FMS PROJECT. YOU WERE COMPLETELY ACCOUNTABLE AND CERTAINLY WENT THE EXTRA MILE TO HELP US.

Darren-Oregon
-------------------------------------------------------------------------------
Tom,
 
Thanks for the "almost new" CNC Lathe!   On one of our common parts, we are able to produce 2-1/2 parts in the time it took to do 1 on our old CNC.  Buying a slightly used machine made it fit in our budget.  We are very pleased customers.
 
Thank you,

Bryan-Missouri

--------------------------------------------------------------------------------

Veronica,

 buenas tardes ,fabrin esta muy satisfecho por el trato que ustedes nos dieron en la compra del torno CNC SQT15MS  El cual para nosotros es muy importante en nuestra producción .y esperamos poder hacer otros negocios

muchas gracias

Juan-Bogotá-Colombia

--------------------------------------------------------------------------------

George,

Thank you again!!!!
We have just installed our new Kitamura Mycenter, and for a shop our size it should make a huge impact on how we do business.This was a tough decision for me to make. Your opinions on this machine and the  many others over the years that I have purchased, have been invaluable.  You are always there to help me, give advice and do research even though we havenever purchased from KD Capital.  You have been a great friend to have in this tough business where most are just looking for the short term buck and giving quick answers to difficult questions.
 
Thank you again
Tim-OH

--------------------------------------------------------------------------------

I like working with Nick and Mike. From a transportation point of view, it is fun and sometimes challenging. Nick and Mike are always on top of their game. They field questions and handle problems very promptly with the information we need to get the job done. I wish all my customers were as easy to work with and handled problems as well. The warehouse company they use have courteous and helpful employees which always make the job easier. I hope to be doing a ton more business with these guys over the next few years.

Paula-Arizona

--------------------------------------------------------------------------------

I have been doing business with George Maloin and K.D. Capital for years. I give George the specs on the machine I’m looking for and he finds the best machine for my budget. I have recommended George and K.D. Capital to several of my customers and the result is always the same, in a word professional!

Steve-Arizona

--------------------------------------------------------------------------------

George
Thanks for a smooth transaction.  The condition was as anticipated and I appreciate the level of service.  We received the machine as promised and you even let me work you over a little bit on the price.

Thanks Again,
Loyal-Arizona

--------------------------------------------------------------------------------
Nick.

I want to express my thanks for the work you did in arranging the purchase of the 3 inline thermo formers we purchased from you a couple of weeks ago.  You worked on the purchase with great professionalism, and even handled the rigging and shipping of the units to my facility, with great success.  It went off without a hitch.  The transaction was a positive experience for me.  Thankyou for your efforts. As we need more equipment, which should be next quarter, we will be contacting you.

Michael-Michigan

--------------------------------------------------------------------------------
Tom,

I appriciate the prompt service that you extended to me when I needed a cnc you found me a Haas and got all the paperwork in order very fast and had my machine delivered to me faster than I expected. Thanks again.    

ps. If I ever need another machine I will give you first shot at finding me one.

Robert-Michigan

--------------------------------------------------------------------------------
Jeff,
Thanks for stepping up and addressing the ball screw issue I had with the machining center I bought from KD. Based on my past experience with other machinery dealers, you did the exact opposite and honored  our word by taking care of the problem and not leaving me hanging. I will be calling you from now on and I’ve told other shop owners about my positive buying experience with you. Thanks again.

Dan-Arizona
-------------------------------------------------------------------------------
Tom,

I recently sold some older CNC equipment to KD Capital.  The sales representative made the process easy and straight forward. There were no hassels coordinating inspections and the ultimate removal of the equipment.  He actually was very patient with our company as we ran into some delays preparing the machines for disposal.  Overall a pleasant experience
 
Pat-Massachusetts

--------------------------------------------------------------------------------

Cris,
Thank you for all your prompt attention on this project. You seem to keep the ball moving very well even when the money is in your bank and that is a sign of a good machinery dealer and it's appreciated.. I hope we can continue to find equipment to buy and sell form each other.

Ken-Indiana

--------------------------------------------------------------------------------

Mike,
I wanted to tell you thanks for making the sale of my mill and lathe totally painless and much faster that I ever could have expected. I have a shinny new Mill on the way thanks to you. One of the best things about your outfit is how well you guys communicate, you are all really easy to get a hold of, makes a huge difference, makes everything low stress.

Thanks,
Dave-Arizona

--------------------------------------------------------------------------------

 “Veronica.
Lo que si puedo decir es que su trato fue excelente y muy profesional. No existe ninguna queja respecto a esta negociación.”
 
ING. SANTOS GARZA-MONTERREY

 -------------------------------------------------------------------------------

"Dave, We have powered up the machine and it sure sounds sweet. The VF-6 which we have (1999) with the same 30HP spindle is not nearly as smooth sounding. Hopefully we will get parts into it this week and can get a more complete sense of how it operates. The seller sure took good care of their machines. This machine table looked as if it had a pallet on it, it's entire life and the table had never directly seen a tool. The machine still had paint on the bottom of the Chip Conveyor! Thank you for a great machine deal"

Mike-California

--------------------------------------------------------------------------------

“VERONICA,  
ESTAMOS MUY AGRADECIDOS CON SU APOYO Y SEGUIMENTO QUE LE DIO A CADA UNO DE LOS CONTRATIEMPOS QE SE PRESENTARON DURANTE LAS NEGOCIACIONES QUE TUVIMOS DE LAS DOS MAQUINAS QUE LES COMPRAMOS.  ADEMAS QUIERO COMUNICARLE QUE LA CALIFICACION DE SU EMPRESA KD CAPITAL EQUIPMENT ES DE EXCELENTE, POR LAS RESPUESTAS TAN SATISFACTORIAS A CADA UNA DE NUESTRAS NECESIDADES Y REQUERIMIENTOS. DE ANTEMANO MUCHAS GRACIAS Y ESPERO EN UN FUTURO SEGUIR CONTANDO CON EL  APOYO DE UD. Y SU EMPRESA.SALUDOS”

ATTE SR. LONGORIA ANGUIANO. LEON GUANAJUATO
GERENTE GENERAL.

--------------------------------------------------------------------------------

"Sean, I would just like to extend my thanks and appreciation to you for your assistance and cooperation on the BOY molding machine deal we just completed. It has been one of the smoothest used equipment purchases I have ever been involved in. From the intial contact to the completion of the deal and arrangement for shipping KD and yourself have been professional, honest and most of all timely with all your communications and commitments. There is no greater compliment I can give than to say that, you said what you would do and you did what you said. Thanks again and I hope we can do business again in the future. Regards, One satisfied customer "

Marty-Ohio

--------------------------------------------------------------------------------

"Somos Una empresa Establecida desde 1980 En La Frontera San-Diego-Tijuana; KD-Capital LCC, Nos Ha impulsado en nuestros proyectos de Crecimiento; Dados Los Lazos de confianza de Ambas Empresas Hacen mas sólida una relación Continua de Negocio y

Crecimiento."

Ing. Leon–Tijuana, Baja California Norte

-------------------------------------------------------------------------------

"Sra. Veronica Sarmiento Me dirijo a Ud. para hacerles llegar nuestro agradecimiento por la atención y el servicio personalizado que sus representantes han tenido con mi empresa para la importación de maquinarias. Estando atentos a todos los requerimientos que necesitamos para realizar operaciones. Desde ya quedamos satisfechos por su atencióny apoyo. Saludos cordiales. "

Sr. Fazzino-Buenos Aires-Argentina

-------------------------------------------------------------------------------

"Nick Kirby a man of his word and a breath of fresh air in a very competitive business."

Bob-Florida

--------------------------------------------------------------------------------

"23 Junio 2006 A QUIEN CORRESPONDA: Por medio de la presente me dirijo a ustedes para manifestarles mi satisfacción por el servicio prestado al adquirir el Torno CNC Cobra 42, quedando satisfecho con el costo del mismo así como de la atención que se sirvieron a ofrecerme, el equipo adquirido es de mi conformidad y lo encuentro en buenas condiciones, sin más por el momento me despido de ustedes quedando a su entera disposición. "

Sr. Ley - Nogales-Sonora

--------------------------------------------------------------------------------

"SRITA. VERONICA SARMIENTO POR MEDIO DE LA PRESENTE SE LE AGRADECE TODAS LAS ATENCIONES Y TODAS LAS FACILIDADES QUE NOS DIO PARA PODER COMPRAR EL CENTRO DE MAQUINADO CNC MARCA BRIDGEPORT QUE EL CUAL QUEDAMOS SATISFECHOS CON LA COMPRA, YA QUE ES NOS VENDIERON UNA MAQUINA EN BUENAS CONDICIONES Y POR TAL MOTIVO RECOMENDAMOS AMPLIAMENTE A LA EMPRESA KD CAPITAL EQUIPMENT, LLC POR SER UNA EMPRESA CONFIABLE….. SIN MAS POR EL MOMENTO Y AGRADECIENDO DE ANTEMANO SU ATENCION QUEDO COMO SU SEGURO SERVIDOR…..ATENTAMENTE. "

Ing. Contreras Semano - Veracruz. Mexico

--------------------------------------------------------------------------------

“Sean, Just wanted to shoot you an email to thank you again regarding your work related to the Autojector machine we bought. It is nice to know that there are still company’s out there that stand behind what they sell. Your willingness to assist us in making sure the machine functioned the way it was supposed to was greatly appreciated. You turned what could have beena lose/lose proposition in to a win/win for both of us.

Thanks, "
Matt-New Jersey "

--------------------------------------------------------------------------------

Over the years in the Plastics industry we have had the opportunity to work with several Machine brokers and have had less than a successful experience. Due to that we have not utilized this option for many years. Last year we had the need and I again looked into the market. After meeting and buying equipment from Sean at KD Capital Equipment I was very satisfied,that again there was a trustworthy option in the used marketplace. They have delivered everything that they promised and have been very professional while doing it. We are very pleased and satisfied with KD performance and will again utilize them whenever the need arises. Thanks again Sean "

Rob-Ohio

--------------------------------------------------------------------------------

"George, I would like to take this opportunity to thank you for your role in executing a tremendously successful orderly liquidation of my companies manufacturing assets. It is with great pleasure that I recommend your company as a machinery dealer that displayed a high degree of integrity, reliability, and market knowledge. KD capital is a leader in a fiercely competitive industry. In addition to your excellent business philosophy, you proved to be thorough and well organized as you approached and completed each phase of the process with great detail and professionalism. You and your associates of KD Capital would be a tremendous resource to any organization, and I am happy to give you my wholehearted endorsement."

Rob-California

-------------------------------------------------------------------------------

"I've been purchasing used equipment from KD Capital for six years. I've purchased three Molding machines over the years, many auxiliary dryers and a grinder. I've also purchased two pieces of CNC equipment, a CNC Mill and a CNC Lathe. Every one of my purchases has been a great experience. They're trustworthy, they stand behind their equipment.... and if or when there are issues they get back to me promptly when I call. They always take care of me.... that's unique in this day and age. Since my first dealing with KD, I've noticed their name, now more than ever, used in and around the machinery and equipment world that I'm in..... and it's always in good reference. That too is a comfort to me...."
Rob-Montana

--------------------------------------------------------------------------------

"Thanks for a nice and fast transaction...no BS., no dickering, get to the right number deal, the way I like to do business. Also being able to package the sale with a Leasing Agent and a Transporter was very professional. I am looking for another machine you may be able to help me with, it's a rare bird, produced for awhile then discontinued. Thanks"

Mike-New Mexico

--------------------------------------------------------------------------------

"Cris from KD made the buying process quite pleasurable. Cris was easy to work with and we will be calling him with any more of our machine tool needs."

Jim-Arizona

--------------------------------------------------------------------------------

"Herb, I have bought my CNC's from you and you have been great and very patient, especially on this last deal, as always."

Keith-California

--------------------------------------------------------------------------------

"Herb, you are pleasant, honest and have stood behind every machine you sold me over the years. I have and will recommend you to other shops."
Joe-Ohio

 --------------------------------------------------------------------------------

"K.D. Capital Equipment is my first stop on the internet for machinery needs. They're quick and courteous."

John-Canada

--------------------------------------------------------------------------------

"I have dealt with Nick Kirby at K.D.Capital Equipment and have found him to be honest and reliable, and I would have no hesitation recommending him to others."

Bill-Canada

--------------------------------------------------------------------------------

"Nick, you were fantastic in putting the deal together for our McNeil 800 even when you were given incorrect information for the machine."

Alby-Canada

--------------------------------------------------------------------------------

"Cris was attentive to our needs and found exactly what we were looking for. He worked quickly and made it a very simple and enjoyable process."

Dave-Arizona

-------------------------------------------------------------------------------

"Herb, Just wanted to thank you, as usual you sold me a great machine at a great price. The Kitamura runs perfect."

Vic-Washington