Year 2018
Make SencorpWhite
Model Series 2500 Ultra 2
Description Roll-Fed / Thin Gauge Thermoformer
Reference # 8070734
Price Activate PricingInquire Now

Specifications

Form Station Max Mold Capacity

34" x 48"

Form Station Tonnage

35 Ton (Top and Bottom)

Form Station Drive(s)

Servos (Top and Bottom)

Form Station Plug Assist

3rd-Axis Lower Servo Plug Assist

Form Station Top & Bottom Daylight Adjust

Servo Actuated

Form Station Top & Bottom Platen Stroke

7.0" (Standard with Safety Stops)

Oven Length

148"

Oven Type

Radiant Oven

Oven Number of Top Zones

26

Oven Number of Bottom Zones

26

Oven Safety Features

(7) IR Scanners with Closed Loop System and Auto Sheet Sag - Detection

Trim Press Tonnage

130 Ton (Special Kiss Cut Servo Press with Tension Bars)

Trim Press Top Trim

Heat Provision

Trim Press X-Press Drive

Motorized to Ride on Linear Slide Bearings

Trim Press Y-Press Drive

Motorized Y Adjustor

Trim Press Adjustment

Top Height Adjustment

Trim Press Indicator Gauge

Tonnage Indicator Gauge

Trim Press Top Trim Feature

Heated Trim Platen with 4 Segens

Trim Press Bottom Trim Feature

Lower Trim Press "Y" Two-Point Electronic

Chain Rails Indexing

Servo Driven

Chain Rails Indexing Preheat

Edge Preheat Sheet Guide 48"

Chain Rails Indexing Rail Adjustments

(4) Point Motorized Rails Adjusters

Chain Rails Indexing Sensors

Temperature Sensors on Both Rails

Chain Rails Indexing Sheetline Distance to The Floor

61"

Chain Rails Indexing Electrical Requirements

480v - 3ph - 60hz

Chain Rails Indexing Equipped With

Auto Chain Tensions, Auto Bow Rail Adjust with Readout on HMI Screen

Unwind Diameter

40" Diameter Roll with Roll Left Assembly (2000 Max Lbs)

Unwind Equipped With

Low Roll Detector, Continuous Feed System, Scrap Rewind System

Part Off-Load System Stacker

Servo Upstack with Push Off and Down Stack

Part Off-Load System Equipped With

Purge Button on Stacker Conveyor (10' Conveyor)

Quick Tool Change System Controller

Siemens Controller System, S7-1500

Quick Tool Change System Equipped With

Form Tool Directional Valve, Vacuum Bleed Valve, Manual Quick Change Tool Rails, Tool Hoist (2,000 Lbs)

* Important: All machinery specifications must be independently verified by buyer. All machinery sales are subject to prior sale. Any agreement to purchase or sell machinery must be in writing.